Table of Contents
Advertisement
BIOS Utilities
FlexiCharger
Warning
If you leave the FlexiCh-
arger continuously "En-
abled" for a period of
5
three months or more,
the battery meter's read-
ing accuracy will deteri-
orate.
To reset this, set the
FlexiCharger to "Dis-
abled", and then allow
the battery to completely
discharge (see
"Battery
FAQ" on page 3 -
before
enabling
function again.
Figure 5 - 4
Advanced Chipset
Control
5 - 8 Advanced Menu
VT-d (Advanced Menu > Advanced Chipset Control)
Enable/disable Intel® Virtualization Technology for Directed I/O (VT-d) from
this menu. This extends Intel's Virtualization Technology (VT) by providing hard-
ware assists for a virtualization solution.
FlexiCharger (Advanced Menu > Advanced Chipset Control)
The sub-menu here allows you to enable/disable the FlexiCharger. The FlexiCharg-
er may be set to automatically start charging your battery when the battery reaches
a certain capacity level (e.g. you could start the battery charge level at 40%).
You can then set the level to stop charging (e.g. 100%), and of course this stop
charge level must be higher then the start charge level.
See the sidebar warning for information on running the FlexiCharger for an ex-
tended period as this is not recommended.
21)
the
Advertisement
Table of Contents
