ATEN KE6900 User Manual page 70

KVM Over IP Matrix System User Manual
Item
Properties
Enable Media
RS232 Settings
Manager
Address
56
Port OS: Use the drop-down menu to select the operating
system of the computer connected to the Transmitter.
OS Language: Use the drop-down menu to select the
operating system language of the computer connected to the
Transmitter.
Enable Multicast Video: Check this box to allow a broadcast of
the Transmitter's video signal to be sent out to multiple User
Stations.
Enable Multicast Audio: Check this box to allow a broadcast
of the Transmitter's audio signal to be sent out to multiple User
Stations.
EDID Mode Selection: EDID contains a display's basic
information and is used by the source device to utilize the best
resolution across different monitors. Select how you want the
source device to acquire the display's EDID:
Default: EDID is set to the default ATEN configuration. This
setting must be used when connecting KE6900 devices to
KE8950 devices.
Auto: Checks the EDID of all connected displays and uses
the best resolution for all displays.
Manual: Manually set the EDID configuration from the
Connections Page (see page 61).
Remix: Checks the EDID of all connected displays and the
source device uses the best common resolution for all
displays.
Select which type of media the Transmitter can stream to User
Stations: Video, Audio, USB, and RS232.
Configure the serial device settings for the Transmitter. The
default settings are:
Baud Rate: 9600
Parity: None
Data Bits: 8 bits
Stop bits: 1 bit
Flow Control: None
Set the IP address and Port number of the computer running
the KE Management software. The default port number is 9110.
Description