Table of Contents
Advertisement
Other Problems
If you are unable to fix problems with the 802.11b and 11g AP Card using
the suggestions in this chapter, you may want to try resetting the AP to
factory default settings.
■
On the 520wl Access Point hold the RESET button down for 5
seconds.
■
Turn the power off and back on again to reboot the Access Point.
■
In some cases you may need to reboot your computer or clients as
well.
Check the documentation that came with the client wireless cards
■
for other troubleshooting procedures for those cards.
If you are still having problems with the 802.11b and 11g AP Card and you
have not been able to fix them with the Troubleshooting suggestions from
this booklet, please refer to the more detailed instructions in the Trouble-
shooting chapter of the HP 520wl User Guide.
13
Advertisement
Table of Contents
