Figure 7. AP Configuration using Setup Wizard
5. Click on the
you want to configure the AP without using the Setup Wizard, click
and see your 520wl User Guide, Chapter Four, Advanced Configuration.
Note:
For more detailed information on how to configure the AP, refer to the 520wl
User Guide.
Association Test
1. Install a separate 802.11b/g wireless PC Card (not the 150wl or the
170wl) in a laptop or other computer, including the drivers and the
Client Manager application.
2. Configure that card to match the network name and encryption key of
the 802.11b and 11g AP Card you just installed in the HP 520wl Access
Point.
3. Verify the Client Manager application shows association with
the HP 520wl Access Point.
8
button to begin and follow the instructions. If
Setup Wizard
Exit