Configuring the Basic Items
The first time you connect to an AP's HTTP interface, the Setup Wizard
launches automatically. The Setup Wizard provides step-by-step instruc-
tions for how to configure the Access Point's basic operating parameter,
such as Network Name, IP parameters, system parameters, and manage-
ment passwords.
The following is a brief summary of the procedure. For a complete descrip-
tion, see your 520wl User Guide, Chapter Two, Getting Started.
1. Open your web browser on the network computer
2. If necessary, disable the browser's internet proxy settings.
3. Type in the IP Address of the HP 520wl. If you don't know the IP address,
please see the HP 520wl Unit Installation foldout for information on
how to determine the IP address.
4. Enter the network password (default is
empty, and click
Figure 6. Network Password
. The Setup Wizard will launch automatically.
OK
), leave the user name field
public
7