Led Activity - HP J8135A Quick Install Manual

LED Activity

The starting point to troubleshoot problems with the card inserted into your
Access Point is looking at the LED activity of the card.
The following table provides an overview of the various modes of operation
and the associated LED activity. It also includes a number of trouble-
shooting hints, that may help solve the problem.
Power LED Radio LED
Continuous Blinking
Green
Off
Off Off
10
LED Activity
Description/Action
Standard operational mode.
Card is powered on.
Sensing/transmitting wireless data.
Card is powered on.
No wireless activity.
No action is required.
Card is not powered on, so it can not transmit/receive
data.
The cause may either be:
• AP Card is not fully inserted into the slot
• AP is not receiving power (LEDs on the AP are not lit)