Cleaning And Maintenance; Cleaning; Technical Data; Noise - Ford FS-50-NICD-2B Instruction Manual

9 CLEANING AND MAINTENANCE

ATTENTION! Always remove the battery before cleaning.
9.1

Cleaning

Keep the ventilation slots of the machine clean to prevent overheating of the
engine.
Regularly clean the machine housing with a soft cloth, preferably after each
use.
Keep the ventilation slots free from dust and dirt.
If the dirt does not come off use a soft cloth moistened with soapy water.
Never use solvents such as petrol, alcohol, ammonia water, etc.
These solvents may damage the plastic parts.
10

TECHNICAL DATA

MODEL NR.
Voltage / frequency charging unit
Rated Voltage
Rotation speed
Torque positions
Max. drill capacity
Charger time
Battery capacity
Battery type
Max. torque
Drill capacity
Concrete :
steel
wood
Chuck type
11

NOISE

Noise values measured according to relevant standard. (K = 3)
Acoustic pressure level LpA
Acoustic power level LwA
ATTENTION! The sound power level may exceed 85 dB(A), in
this case individual hearing protection shall be worn.
aw (Vibration)
Copyright © 2015
FS-50-NICD-2B
FS-50-NICD-2B
230V~ 50Hz
14.4 V
-1
0-550 min
20+1
10 mm
3-5 hours
1200 mAh
Ni-CD
12 Nm
-
10 mm
20 mm
Sanou keyless chuck
3.12 m/s²
P a g e | 9
EN
72 dB(A)
83 dB(A)
K = 1.5 m/s²
www.Ford-tools.com