Ford FX1-120 Instruction Manual
  1. Manuals
  2. Brands
  3. Ford Manuals
  4. Power Tool
  5. FX1-120
  6. Instruction manual
Ford FX1-120 Instruction Manual

Ford FX1-120 Instruction Manual

Router 1200w
Hide thumbs
Table of Contents

Advertisement

Quick Links

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the FX1-120 and is the answer not in the manual?

Questions and answers

Related Manuals for Ford FX1-120

Summary of Contents for Ford FX1-120

  • Page 2: Table Of Contents

    FX1-120 APPLICATION ................3 DESCRIPTION (FIG A) ............3 PACKAGE CONTENT LIST ............3 SYMBOLS ..................4 GENERAL POWER TOOL SAFETY WARNINGS ....4 Working area ..................... 4 Electrical safety ....................4 Personal safety ....................5 Power tool use and care ................5 Service ........................
  • Page 3 FX1-120 ENVIRONMENT ................ 12 DECLARATION OF CONFORMITY ........13 Copyright © 2015 www.Ford-tools.com P a g e...

  • Page 4: Application

    FX1-120 ROUTER 1200W FX1-120 1 APPLICATION The router is suited for routing work to wood and wood-like materials as well as plastics. It is not designed for commercial use. WARNING! Please read and understand this operating manual before use and keep it for your future reference. Your power tool should only be passed on together with these instructions.

  • Page 5: Symbols

    FX1-120 4 SYMBOLS The following symbols are used in this manual and/or on the machine: Denotes risk of personal injury or damage to the Wear noise protection tool. Read manual before use Wear eye protection In accordance with Wear a mask In dusty...

  • Page 6: Personal Safety

    FX1-120 Avoid body contact with earthed surfaces such as pipes, radiators, kitchen ranges and refrigerators. There is an increased risk of a lethal electric shock if your body is earthed. Do not expose power tools to rain or wet conditions. If water gets inside a power tool, it will increase the risk of a lethal electric shock.

  • Page 7: Service

    FX1-120 preventive safety measures reduce the risk of starting the power tool accidentally. Store power tools, when not in use, out of the reach of children and do not allow people who are not familiar with the power tool or these instructions to operate it.

  • Page 8: Assembly

    FX1-120 bit rotates clockwise. Feed direction of cutting must be counter-clockwise (Fig 12). NOTE: inside and outside cuts will require different feed direction; refer to section on feeding the router. Feeding the tool in the wrong direction causes the cutting edge of the bit to climb out of the work and pull the tool in the direction of this feed.

  • Page 9: Locking Lever (13) For Cutting Machine Body

    FX1-120 Locate the depth stop (4) on the left-hand side of the cutting machine. This continuously adjustable stop is intended to limit the depth of the cut. Loosen it by turning it in anticlockwise direction. To move the depth stop up or down to the desired depth according to the marker of the scale label (3).

  • Page 10: Dust Extraction Outlet (Fig. 6)

    FX1-120 Dust extraction outlet (Fig. 6) It is advised to use the dust extraction outlet. You can purchase a suitable commercial vacuum cleaner or extract the dust via an extractor tube while the cutting machine is in operation. The outlet must project out of the rear of the machine. Two bolts and nuts are supplied to attach it.

  • Page 11: Cutting Direction

    FX1-120 CAUTION: Do not change the speed when the machine is working under load. Cutting direction Always observe the safety instructions and applicable regulations. Always move your router as indicated in below Fig. 10 (outer edges/inner edges). To prevent the cutter head from jumping and to obtain a good result, carry out exterior cuts in anticlockwise and interior cuts in clockwise direction.

  • Page 12: Technical Data

    FX1-120 TECHNICAL DATA Model FX1-120 Nominal voltage 230-240V~ 50Hz Power consumption 1200W No load speed 11 000-30 000 min-1 Cutting depth 35 mm Spindle diameter cutter 6 & 8 mm SOUND EMISSIONS Noise values measured according to relevant standard. (K = 3)
  • Page 13 FX1-120 Devices or parts which are replaced under the warranty therefore remain the property of Herculano Santos, Lda. We reserve the right to reject a claim whenever the purchase cannot be verified or when it is clear that the product has not been properly maintained.

  • Page 14: Declaration Of Conformity

    Herculano Santos, Lda, declares that, declares that, Product : Router 1200W Trade mark : Ford-tools Model : FX1-120 Is in conformity with the essential requirements and other relevant provisions of the applicable European Directives, based on the application of European harmonized standards.

Table of Contents