Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Ford F181-50
Summary of Contents for Ford F181-50
-
Page 2: Table Of Contents
F181-50 APPLICATION ................3 DESCRIPTION (FIG A) ............3 PACKAGE CONTENT LIST ............3 SYMBOLS ..................4 GENERAL POWER TOOL SAFETY WARNINGS ....4 Working area ..................... 4 Electrical safety ....................4 Personal safety ....................5 Power tool use and care ................5 Service ........................ - Page 3 F181-50 8.4.2 Direction of rotation (Fig 5) ................9 8.4.3 Variable speed ....................10 Adjusting the torque ..................10 Speed selector (Fig 6) .................. 10 LED light (Fig 7) ....................10 DRILLING ................... 11 Drilling ........................ 11 Wood drilling ....................11 Metal drilling ....................
-
Page 4: Application
F181-50 DRILL 18.0V F181-50 1 APPLICATION The power tool is intended for driving and drilling through wood, metal, plastics and masonry. It is not designed for commercial use. WARNING! Please read and understand this operating manual before use and keep it for your future reference. Your power tool should only be passed on together with these instructions. -
Page 5: Symbols
F181-50 SYMBOLS The following symbols are used in this manual and/or on the machine: Denotes risk of personal In accordance with injury or damage to the essential requirements of tool. the European directive(s) "Class II - The machine is double insulated;... -
Page 6: Personal Safety
F181-50 Do not expose power tools to rain or wet conditions. If water gets inside a power tool, it will increase the risk of a lethal electric shock. Do not damage the cord. Never use the cord for carrying, pulling or unplugging the power tool. -
Page 7: Service
F181-50 instructions to operate it. Power tools are potentially dangerous in the hands of untrained users. Maintenance. Check for misalignment or jammed moving parts, breakages or any other feature that might affect the operation of the power tool. If it is damaged, the power tool must be repaired. Many accidents are caused by using poorly maintained power tools. -
Page 8: Chargers
F181-50 Chargers Use the charger provided with the tool only to charge the battery Never attempt to charge non-rechargeable batteries. Have defective cords replaced immediately. Do not expose to water. Do not open the charger. Do not probe the charger. -
Page 9: Operating Instructions
F181-50 8 OPERATING INSTRUCTIONS Charging the battery pack The battery pack for this tool is supplied in a low charge condition to prevent possible problems, therefore, you have to charge the battery before first use. Note: Batteries will not reach full charge the first time they are charged. -
Page 10: Inserting And Removing The Battery (Fig 2)
F181-50 NOTE: Remove battery pack from charger stand which use your thumb or fingers, press the battery’s release button in and pull the battery pack off at the same time. Inserting and removing the battery (Fig 2) WARNING: Before making any adjustments ensure the drill is... -
Page 11: Variable Speed
F181-50 8.4.3 Variable speed This tool has a variable speed switch that delivers higher speed and torque with increased trigger pressure. Speed is controlled by the amount of switch trigger depression. Adjusting the torque The torque is adjusted by rotating the torque setting ring; the torque is greater when the torque setting is set on a higher position. -
Page 12: Drilling
F181-50 9 DRILLING Drilling Before use for drilling, the torque setting should be set on drill position “ ”. When drilling hard smooth surface, use a center punch to mark the desired hole location. This will prevent the drill bit from slipping off center as the hole is started. -
Page 13: Technical Data
F181-50 TECHNICAL DATA Model F181-50 Chuck 13 mm keyless Power supply 18 Volt DC Gear Train 2 Speed No Load Speed 0-400/0-1200 min Clutch 23+1 Positions Charger input 230 V 50 Hz Charger Rate 1 uur Torque 28Nm (MAX.) Battery Type... -
Page 14: Environment
F181-50 given in the manual), inexpert assembly, lightning strike, erroneous net voltage. This list is not exhaustive. Acceptance of claims under warranty can never lead to the prolongation of the warranty period nor commencement of a new warranty period in case of a device replacement.
Need help?
Do you have a question about the F181-50 and is the answer not in the manual?
Questions and answers