Technical Data; Noise; Cleaning And Maintenance; Cleaning - Ford FCA-50 Instruction Manual

The torque increasesduring the 5 first seconds of operation. When assembling or
disassembling a bolt, you will keep the tool running for more than 5 seconds, but
it does not mean the torque will continue to increase.
10

TECHNICAL DATA

Model n°
Nominal voltage
Power consumption
No load speed
Max. Torque
Square drive
Weight
11

NOISE

Noise values measured according to relevant standard. (K = 3)
Acoustic pressure level LpA
Acoustic power level LwA
ATTENTION! The sound power level may exceed 85 dB(A), in
this case individual hearing protection shall be worn.
aw (Vibration)
Warning! The vibration emission during actual use of the power tool can differ
from the declared total value depending on the ways in which the tool is used.
There is the need to identify safety measures to protect the operator that are
based on an estimation of exposure in the actual conditions of use (taking account
of all parts of the operating cycle).
12

CLEANING AND MAINTENANCE

Before any intervention on product, ensure that product is
disconnected from its power source.
12.1

Cleaning.

Clean the tool only with a moist cloth. Use no alcohol, petrol, or chemicals for
§
cleaning. Hold the ventilation slits open.
Do not put in or immerse product in water or any other liquid.
§
Clean ventilation holes with a soft brush.
§
Have your tool repaired by a qualified person.
§
Repairs should only be carried out by qualified persons using original spare
§
parts, otherwise it may result in considerable danger to the user.
12.2

Storage

Keep the product, user manual and accessories in the original packaging.
§
It is recommended to store the tool in a clean, dry area, and place it out of
§
reach of children, either stored in height or locked up.
FCA-50
220-240V
1010W
2200 min
450 Nm
½" (13 mm)
3.89kg
18.939m/s²
P a g e | 9
-1
98.2 dB(A)
109.2 dB(A)
K = 1.5 m/s²