Ford F181-30 Instruction Manual
Ford F181-30 Instruction Manual

Ford F181-30 Instruction Manual

Jigsaw 18.0v

Advertisement

Quick Links

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the F181-30 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Ford F181-30

  • Page 2: Table Of Contents

    F181-30 APPLICATION ............3 DESCRIPTION (FIG. A) ..........3 PACKAGE CONTENT LIST ......... 3 SYMBOLS ..............4 GENERAL POWER TOOL SAFETY WARNINGS .... 4 Working area ..................... 4 Electrical safety ....................4 Personal safety ....................5 Power tool use and care ................5 Battery tool use and care ................
  • Page 3 F181-30 10.1 Cleaning ......................10 10.2 Maintenance ..................... 10 TECHNICAL DETAILS ..........11 NOISE ..............11 WARRANTY ............12 ENVIRONMENT ............12 14.1 Battery pack ..................... 12 Copyright © 2015 www.Ford-tools.com P a g e...
  • Page 4: Application

    F181-30 JIGSAW 18.0V F181-30 1 APPLICATION The power tool is intended for sawing wood, metal and plastics. It is not designed for commercial use. WARNING! Read this manual and general safety instructions carefully before using the appliance, for your own safety. Your power tool should only be passed on together with these instructions.
  • Page 5: Symbols

    F181-30 4 SYMBOLS In this manual and/or on the machine the following symbols are used: Denotes risk of personal In accordance with injury or damage to the essential requirements of tool. the European directive(s) "Class II - The machine is double insulated;...
  • Page 6: Personal Safety

    F181-30 Avoid body contact with earthed surfaces such as pipes, radiators, kitchen ranges and refrigerators. There is an increased risk of a lethal electric shock if your body is earthed. Do not expose power tools to rain or wet conditions. If water gets inside a power tool, it will increase the risk of a lethal electric shock.
  • Page 7: Battery Tool Use And Care

    F181-30 preventive safety measures reduce the risk of starting the power tool accidentally. Store power tools, when not in use, out of the reach of children and do not allow people who are not familiar with the power tool or these instructions to operate it.
  • Page 8: Additional Safety Instructions For Batteries And Chargers

    F181-30 Be careful when working on walls. Damage to power supply lines, gas or water pipes can lead to dangerous situations. Use appropriate detectors to establish whether there are concealed wires or pipes in the working area. Secure the work piece. The work piece is only secure if it is held by work- holding devices or in a vice.
  • Page 9: Operation

    F181-30 8 OPERATION Charging the battery pack The battery pack for this tool is supplied in a low charge condition to prevent possible problems, therefore, you have to charge the battery before first use. Note: Batteries will not reach full charge the first time they are charged.
  • Page 10: Inserting And Removing The Battery (Fig 2)

    F181-30 NOTE: Remove battery pack from charger stand which use your thumb or fingers, press the battery’s release button in and pull the battery pack off at the same time. Inserting and removing the battery (Fig 2) Remove the battery pressing the battery latches and at the same time pull the battery pack off.
  • Page 11: Operation

    F181-30 9 OPERATION Hold the saw in front of you with a firm grip on the handle. Ensure that the saw blade is not touching anything when starting the saw. Make sure that the item is clamped tight, and that the saw line is clearly marked. Connect the vacuum extractor nozzle to an extractor system where possible.
  • Page 12: Technical Details

    F181-30 TECHNICAL DETAILS MODEL NUMBER F181-30 Rated voltage Rotation speed 0-2400min Battery capacity 1500mAh Battery type Li-ion LED worklight Number of LED’s Pendular positions Carbon brush motor Adjustable base Stroke height 19mm Cutting depth steel Cutting depth wood 65mm Cutting depth plastic...
  • Page 13: Warranty

    F181-30 WARRANTY This product is warranted as provided by law for a 24 -month period effective from the date of purchase by the first user. This warranty covers all material or production flaws excluding: batteries, chargers, defective parts subject to normal wear & tear such as bearings, brushes, cables, and plugs, or accessories such as drills, drill bits, saw blades, etc.

Table of Contents