Repeater Mode - D-Link DAP-1665 User Manual

Section 3 - Configuration
Repeater mode re-broadcasts the wireless signal of an existing network to increase coverage. The existing wireless signal can
be repeated by the DAP-1665 using both the 2.4 GHz and 5 GHz bands.
Wireless Mode: Select Repeater from the drop-down menu.
Wireless Network Click Scan to display a list of wireless networks in your area. In
Name: the pop-up, click on the SSID, and click Select at the bottom
of the page to continue. The wireless network name will
automatically appear in the Repeater Network Name field
below, and the Repeater Network Band and Channel Width will
automatically be detected. You can also manually enter the SSID
of the access point you want to repeat the signal of.
Password:
Enter a custom password for the existing network.
Status:
Displays the name of the network to be repeated.
Wi-Fi Name Specify a network name (SSID) to identify the 2.4 GHz network.
(SSID):
This is the network name that wireless clients will search for
when connecting to your wireless network.
Password:
Enter a password for connecting to your 2.4 GHz network.
D-Link DAP-1665 User Manual

Repeater Mode

Existing Network
2.4 GHz Extended Wi-Fi
44