D-Link DAP-1665 User Manual page 54

Section 3 - Configuration
Status: Click to enable the wireless function for the 5 GHz band. If you
do not want to use wireless, uncheck the box to disable all
wireless functions.
Wi-Fi Name Specify a network name (SSID) to identify the 5 GHz network.
(SSID): This is the network name that wireless clients will search for
when connecting to your wireless network.
Password: Enter a custom password for this network.
Advanced Settings:
802.11 Mode: Select one of the following:
802.11a Only - Select if you are only using 802.11a wireless
clients.
802.11n Only - Select if you are only using 802.11n wireless
clients.
Mixed 802.11a/n - Select if you are using a mix of 802.11n and
802.11a wireless clients.
802.11ac Only - Select if you are only using 802.11ac wireless
clients.
Mixed 802.11n/ac - Select if you are using a mix of 802.11ac
and 802.11n wireless clients.
Mixed 802.11a/n/ac - Select if you are using a mix of 802.11ac,
802.11n, and 802.11a wireless clients.
Wi-Fi Channel:
Choose a channel from the drop-down list for an existing
wireless network or to reduce interference in congested areas.
Channel Width:
Select the Channel Width:
Auto 20/40 - Select this if you are using both 802.11n and non-
802.11n wireless devices.
Auto 20/40/80 MHz - Select this if you are not using any 802.11n
wireless clients.
D-Link DAP-1665 User Manual
5 GHz Bridge Wi-Fi
53