Power Cabling
Power cabling for the MicroCell is the same, no matter what your equipment configuration is.
The MicroCell uses house current from a 120VAC outlet.
• Connect one end of the AC adapter to the rear panel connector marked AC adapter.
• Connect the other end to the AC outlet.
That completes installation. The device is now ready to be registered.
ANT
PC
Ethernet
Reset
Power
AT&T 3G
MicroCell
OCTOBER 24, 2008 DRAFT
™
OCTOBER 24, 2008 DRAFT
AC Power
Power
Adapter
Outlet
T13830
11