Activate Your Account - AT&T 3G MICROCELL User Manual

Hide thumbs Also See for 3G MICROCELL:
Table of Contents

Advertisement

Activate Your Account

You must register your AT&T 3G MicroCell™ online before your service can be activated. Please
go to att.com/3GMicroCell, which will walk you through the following steps.
• Login and navigate to the Welcome page. It will provide helpful information on what you will
need to activate your service. Select "Set Up Your Device. "
Step 1: Enter the serial number located on the bottom of your device. Please note that the serial
number is case sensitive. Select "Next. "
Step 2: Enter a nickname for your device, your email, and the street address where your device is
installed. This sets the location for E911 service*. Select "Next."
Step 3: Set up your Approved User List. Enter the wireless numbers you would like to grant access to
your MicroCell. You can add more numbers at anytime, up to 10 in all. Select "Next. "
Step 4: Confirm AT&T 3G MicroCell™ Device Set Up Information—Review your account
information for accuracy, and Terms & Conditions. Select "Submit. "
Congratulations! You have completed your online registration.
• Visit att.com/3GMicroCell anytime to manage your device settings.
• After registering your device, it can take 10-30 minutes to activate. Service is available when
all MicroCell status LEDs turn green. If the Power LED stays red or if the 3G LED is still flashing
after 30 minutes, see Troubleshooting on page 16 for additional information.
*E911 Service: AT&T 3G MicroCell™ service is not available when either electrical service or your
broadband service is unavailable. You will not be able to access E911 service using your wireless
device unless you have service on AT&T's wireless network from your home. The MicroCell unit
includes a GPS device that enables the unit to identify its location. The MicroCell will not work
until it has identified its location. If the MicroCell is moved to a new location, it is important that
instructions for updating the device location be followed to enable E911 service to function
properly.
12
OCTOBER 24, 2008 DRAFT
SN: ABCDEFGHIJKLMNO
OCTOBER 24, 2008 DRAFT
Serial
Number
T13865

Advertisement

Table of Contents
loading

Table of Contents