Getting To Know Your Device Status Indicators (Front of the Device) Power Ethernet Computer Ethernet Computer Power Package Contents AT&T 3G MicroCell™ | AC power adapter | Yellow ethernet cable | Quick Start | User Guide...
Before You Begin • Plan your installation location – your device should be: – Within three feet of a window to receive a GPS signal for 911 purposes. – At least one foot away from other wireless broadcasting devices to avoid possible interference. –...
Quick Setup Connect your device to the Internet Connect the yellow ethernet cable from the “Ethernet” port on your MicroCell to your router. (If you don’t have a router, see User Guide page 9.)
Power on your device Connect your MicroCell to a power outlet with the AC power adapter. The Power light on the front of the device will come on immediately. Within a few minutes, other lights will fl ash as a GPS signal is located and software is updated. Activate your device online Proceed to Step 4 if you completed online activation at the AT&T store.
Wait while your device connects Take a break! NOTE : You will receive a text message and email once It can take up to 90 activation is complete. minutes to complete Visit att.com/3GMicroCell to learn more on how to activation. Your get the most out of your MicroCell.
Confi rm your success Your device is confi gured and working properly when: NOTE : You may need to » You receive a text message and an email confi rmation. restart your cell » The 3G light on your MicroCell is solid and GREEN. phone for “AT&T »...
The use of the word partner does not imply a partnership relationship between Cisco and any other company. AT&T, the AT&T logo, and AT&T 3G MicroCell are trademarks of AT&T Knowledge Ventures. Product and service availability is subject to change without notice.
Need help?
Do you have a question about the 3G MicroCell and is the answer not in the manual?
Questions and answers