Connecting The Usb Sensor Adapter - Boston Scientific LATITUDE Patient Manual

Connecting the USB Sensor Adapter

The USB sensor adapter is included with a LATITUDE
weight scale and blood pressure monitor. The USB
sensor adapter provides a wireless connection between
these products and the Communicator. Refer to
Figure 9.
Figure 9. USB sensor adapter connection
1. Remove the cap from the USB sensor adapter.
2. Plug the USB sensor adapter into either of
the USB ports labeled
Communicator.
Leave the USB sensor adapter plugged into the
Communicator so the Communicator can receive
measurements whenever you use your weight scale or
blood pressure monitor.
LATITUDE
on the back of the
Communicator Patient Manual
®
53