Boston Scientific LATITUDE Patient Manual page 20

4. Insert the AC adapter (included) into the jack
labeled .
5. Plug the AC adapter into an electrical outlet that is
easily accessible.
6. When electrical power is supplied, the
Communicator begins a startup process. The
LATITUDE indicator fl ashes for up to one
minute while the Communicator starts up. The
Communicator then lights all the indicators for
approximately one second to indicate all indicators
are working.
If the LATITUDE indicator is not lit, check that both
ends of the AC adapter are plugged in fi rmly. Check
if the light on the AC adapter is on.
Important: Your Communicator should remain
connected to the electrical outlet and telephone wall
jack.
7. When installing the Communicator for the fi rst
time, wait for the Heart button to fl ash with a white
light. Press the fl ashing Heart button to check if
the Communicator can interrogate your implanted
device and send your data to the LATITUDE
system.
Continue with step 8 unless installation takes longer
than 5 minutes or the Heart button fl ashes again. In
that case, continue with "Software Download and
Installation" on page 10.
8. Determine whether the installation succeeded
( all indicators are lit a steady color) or failed by
referring to "Indicator Sequence When Using the
Heart Button" on page 17.
12
Communicator Patient Manual
®
LATITUDE