Repair Manual
Removing the Synchro Contact
Removal
1.
Remove the Shutter Assembly. (See "Removing the Shutter Assembly,"
page 54)
2.
Unsolder Wiring Cable 3 (black) from the Synchro Contact (Figure 4-16).
3.
Remove the small phillips bindinghead screw and contact collar securing
the Synchro Contact and contact washer to the Driver Plate (Figure 4-15).
4.
Lift off the Synchro Contact and contact washer from the Driver Plate
(Figure 4-15).
Figure 4-15 Removing the Synchro Contact
Driver Plate
59
Contact Washer
Synchro Contact
Contact Collar
Phillips Bindinghead Screw
ID-200 Camera