Query Function; Compuglo Back-Light Mode; Trunk Release - CompuSTAR 2WSSR Installation And User Manual

The engine will run 15 or 25 minutes (25 or 40 min for diesel) depending on preset
options at the time of installation and then shut off. If your remote-pager has a
problem starting the vehicle, CompuStar will try 2 additional times. If the engine
does not start after the third attempt, please call your authorized CompuStar dealer.
Diagnosing problems with Auto-Start
If there is a problem in auto-starting your car, you will hear three chirps when you
attempt to auto-start the car. Wait for 2 seconds and the cause for the error will be
indicated by the number of times the car chirps and parking lights flash.
Error Number (# of times the car chirps
& parking lights flash)
1
2
3
4
5
6
7
Q u e r y F u n c t i o n
Query Function allows the owner to visually monitor the status of your car by looking
at the remote-pager CompuGLO LCD icons. Press Button IV for a ½ second to
activate the Query Function.
C o m p u G L O B a c k - Li g h t M o de
Press Button IV for 2 seconds to activate light mode. A red-border indicator box
named Light will darken in the upper right-hand corner of your CompuGLO LCD
indicating that light mode is activated. In this mode, when you press the remote-
pager buttons, the CompuGLO LCD will glow. In order to turn off light mode, press
Button IV for 2 seconds.
T r u n k R el e a s e
Error Reason
Engine On
Key On
Door Open
Trunk Open
Brake On
Hood Open
Reservation Off (Manual Transmission Only)
© 2001 Firstech, Inc. Page 8