Panic Mode; Auto-Start Function - CompuSTAR 2WSSR Installation And User Manual

Light impact to your vehicle will activate the first stage shock sensor and
the car siren will chirp 4 times in addition to the parking lights flashing 4
times. The remote pager unit will beep and a vibration icon will appear in
the CompuGLO LCD.
Heavy impact to your vehicle will activate the second stage shock sensor
and the car siren will chirp for 30 to 60 seconds and the parking lights will
flash for 60 seconds. The remote-pager will be notified audibly and a
hammer icon will appear in the CompuGLO LCD. Press Button I for a ½
second to turn off the second stage shock sensor sirens and flashing
lights.
P a n i c M od e
Panic Mode allows the owner to draw attention to the car in case of an emergency
or in order to easily locate your vehicle in a large parking lot. Press Button IV for 2
seconds on the remote-pager to enter Panic Mode. In this mode, the car will arm if
not armed already and the siren will activate and the parking lights will flash. In
order to disengage Panic Mode, press Button IV for 2 seconds. Then, press Button
I for a ½ second to unlock/disarm your vehicle.
A u t o - S t a r t F u n c t i o n
Press Button II for 2 seconds to auto-start an automatic transmission engine. You
will hear one beep from your remote-pager if there is successful communication with
your vehicle. The engine will start and give you a visual confirmation by an exhaust
fume icon coming out from the tailpipe on the remote-pager CompuGLO LCD.
Remember that a manual key in the ignition is required to drive the car. In addition,
the anti-grind circuit prevents you from overcranking the starter on a remote-
started vehicle. Press Button II for 2 seconds in order to turn off an auto-started car.
For manual transmission vehicles, please use reservation mode.
© 2001 Firstech, Inc. Page 7