Do you have a question about the 2WSSR and is the answer not in the manual?
Questions and answers
Tom
January 23, 2025
My fob keeps saying hold and won't let me unlock my vehicle
1 comments:
Mr. Anderson
February 10, 2025
The CompuSTAR 2WSSR fob may display "hold" and prevent unlocking your vehicle if the system is in alarm mode or Valet mode. In alarm mode, the starter kill function is activated, preventing the car from starting even with a manual key. If an unauthorized trunk door opening or an impact is detected by the dual stage shock sensor, the alarm system will engage, and the fob may require a specific button combination to disable it. Additionally, if the system is in Valet mode, security functions, including remote unlocking, may be disabled to prevent accidental activation. To resolve this, try pressing Button I for ½ second to turn off the alarm and repeat to disarm the alarm mode. If in Valet mode, it must be deactivated to restore normal operation.
This answer is automatically generated
John Hall
February 4, 2025
Is there a different remote that I can use with this system?
1 comments:
Mr. Anderson
February 10, 2025
The CompuSTAR 2WSSR system is not compatible with most other Compustar remotes and systems.
Page 1
2WSSR Two-Way Spread Spectrum Remote USER’S GUIDE FCC ID : 044JMR600SS This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions : USER’S GUIDE (1) This device may not cause harmful interference, and...
Controller : This 5 inch by 3.5 inch by 1 inch rectangular black box is the brain of the implied warranty will last or the exclusion or limitation of incidental or consequential CompuStar 2WSSR system and is installed underneath the dashboard of your vehicle. damages. This warranty gives you specific legal rights, and you may also have other Upon receipt of a digital signal from the antenna, the controller can perform car tasks rights, which vary State to State.
CompuStar because of improper installation or a faulty dome light switch, tration card and mailed it to Firstech, Inc., within 10 days after the purchase to the do not use the CompuStar and take your vehicle to the dealer immediately for repair. address listed on the registration card.
Remote-Pager Button Functions The user can activate differing functions of CompuStar 2WSSR system by pressing Icon Explanation one or two buttons simultaneously (ex.(I+IV) ) located on the antenna side of your Shock Indicates if the Shock Sensor is on or off. See page 12.
USING YOUR SYSTEM Turn the key on/off 5 times. If you hear a Your CompuStar 2WSSR system has many different modes and functions that can be relay clicking sound, you are in the learning activated by using your remote-pager unit.
The engine will run 15 or 25 minutes (25 or 40 min for diesel) depending on preset The dual stage shock sensor on the CompuStar 2WSSR can detect between light and options at the time of installation, and then shut off. If your remote-pager has a problem heavy impact to your vehicle by sensing vibration produced by differing impacts.
The car siren chirps once for lock and twice for unlock. You can delete this audible celled if the door is opened or the CompuStar system is put in Valet mode after the re chirping by pressing Buttons (I+II) for a second and the car siren icon will disappear servation has been set.
There are two types of passive arming that can be Timer Start Mode programmed by your CompuStar dealership : (1) passive arming with passive lock and (2) passive arming without passive lock. In Timer Start Mode, your car automatically starts every 1.5 or 3.0 hours depending on Passive locking means the door will lock when the system passively arms.
Q : Is there a monthly charge for the remote-pager ? RPS visual and audible paging alerts. A : No, the CompuStar system is based on Spread Spectrum modulation with up to a 1.25 mile transmitting and receiving distance without a monthly fee.
First, check to see that the dual stage shock sensor is activated by observing that a red- pager unit, you are in this mode and all the functions of the CompuStar 2WSSR are dis bordered indicator box labeled Shock that is darkened in the top left-hand corner of your abled except for keyless entry.
Page 12
Another reason maybe that you are in Valet Mode. If there is a ZZZ icon on your remote- pager unit, you are in this mode and all the functions of the CompuStar 2WSSR are dis- Press Button for a second to deactivate the RPS paging alerts.
Need help?
Do you have a question about the 2WSSR and is the answer not in the manual?
Questions and answers
My fob keeps saying hold and won't let me unlock my vehicle
The CompuSTAR 2WSSR fob may display "hold" and prevent unlocking your vehicle if the system is in alarm mode or Valet mode. In alarm mode, the starter kill function is activated, preventing the car from starting even with a manual key. If an unauthorized trunk door opening or an impact is detected by the dual stage shock sensor, the alarm system will engage, and the fob may require a specific button combination to disable it. Additionally, if the system is in Valet mode, security functions, including remote unlocking, may be disabled to prevent accidental activation. To resolve this, try pressing Button I for ½ second to turn off the alarm and repeat to disarm the alarm mode. If in Valet mode, it must be deactivated to restore normal operation.
This answer is automatically generated
Is there a different remote that I can use with this system?
The CompuSTAR 2WSSR system is not compatible with most other Compustar remotes and systems.
This answer is automatically generated