Download Print this page
CompuSTAR RF-2WT10R-SS Quick Start Card

CompuSTAR RF-2WT10R-SS Quick Start Card

Advertisement

Quick Links

Valet Mode: If your remote start is not
working, you may be in Valet Mode. Your
parking lights will also not flash. Your
doors will still lock and unlock. To exit
Valet Mode, tap the Lock and Trunk
buttons or turn the Ignition On and then
tap the foot brake 10 times or reprogram
your remote(s). Holding the Lock and
Trunk buttons for 2.5 seconds will turn
your FT-DAS or Shock Sensor on or off.
2WLCD-SepLU_QuickCard line.indd 1
QUICK START CARD
Tap the Lock Button to lock your doors and/or arm your vehicle. Hold this button for
2.5 seconds to activate Button Lock. "Hold" will flash on the LCD when you press
any button. Hold this button for 3.5 seconds to activate panic/vehicle locater.
Tap the Unlock Button to unlock your doors and/or disarm your vehicle.
Hold this button for 2.5 seconds to pop your trunk. If not equipped, ask your
Authorized Dealer for details on how to get it.
Hold this button for 2.5 seconds to start your vehicle. Your remote will receive a
page back alert and run time countdown timer will start. If enabled, double tapping
this button will reset your remote start run time or turbo timer. Status: Tapping this
button will activate vehicle status check. The first tap will check temperature inside
your vehicle, second, battery voltage and third, remote battery voltage. Repeat and
your vehicle will shut off.
Auxiliary 1: Tap the Start Button and then tap the Trunk release button.
Auxiliary 2: Tap the Start Button, Press and hold Trunk + Start Buttons for 2.5
seconds and then tap the Trunk Button.
Tap these two buttons at the same time to turn Valet Mode off. Turn Ignition On and
tap buttons to turn on. Hold them for 2.5 seconds to turn your FT-DAS or Shock
Sensor on or off.
Tap these two buttons at the same time to turn the horn or siren chirps on or off.
Tap these two buttons to activate Passive locking/arming. Your system will lock/arm
after 30 seconds if enabled. Hold these two buttons for 2.5 seconds to enter the
Remote Option Menu.
8102REUCL000500 // FT-2WLCD-S Guide REV1
RF-2WT10R-SS
2013/6/6 10:13:05

Advertisement

loading
Need help?

Need help?

Do you have a question about the RF-2WT10R-SS and is the answer not in the manual?

Questions and answers

Iqbal
April 23, 2025

Remote not functioning. Has "Hold" in status area. new battery

Summary of Contents for CompuSTAR RF-2WT10R-SS

  • Page 1 8102REUCL000500 // FT-2WLCD-S Guide REV1 QUICK START CARD RF-2WT10R-SS Tap the Lock Button to lock your doors and/or arm your vehicle. Hold this button for 2.5 seconds to activate Button Lock. “Hold” will flash on the LCD when you press any button.
  • Page 2 Switches between Fº and Cº. Questions/comments? Contact us at 888-820-3690 from 8 AM Register online at www.compustar.com within 10 days of purchase to to 5 PM PST. Also please visit www.compustar.com for a complete activate your new remote’s warranty. user’s manual.