Led Display With Touchscreen Digital Controls - Sensio CRUX Instruction Manual

LED Display with Touchscreen Digital Controls

Figure 2
1. TEMPERATURE ICON / TEMPERATURE DISPLAY. Backlighted digital TEMPERATURE display.
2. TIME ICON / TIME DISPLAY. Backlighted digital count down timer displays remaining
TIME to 00:00.
3. START/STOP Button. When the START/STOP button is pressed for 5 seconds, the
default TEMPERATURE/TIME 130°F / 08:00 hours will appear on the display.
4. MODE (M) Button. Press MODE(M) to change to TIME or TEMPERATURE. The active
MODE will begin to flash.
5. (+) or (-) Buttons. Use the (+) or (-) buttons to adjust the cook TIME from 00:10 minutes
to 2:00 hours in 1 minute increments; or from 2:00 hours to 72:00 hours in 30 minute
increments. Use the (+) or (-) buttons to adjust the cook TEMPERATURE from 115°F
to 195°F.
You can switch temperature display from Fahrenheit to Celsius before the unit starts
pre-heating by pressing the 'M' button for 5 seconds. When the power cord is plugged-in,
the default time and temperature of 08:00 hours and 130 deg F are displayed. You can
press the M button for 5 seconds to switch between Fahrenheit to Celsius or vice versa.
After the temperature display has been switched to the desired units you may continue to
set desired cooking time and temperature.
1
2
5
4
11
Hold 5 sec.
to power ON
3