BE QUIET! Silent base 600 User Manual page 8

7.3 Front I/O ports
1 USB 2�0
2 Headphone jack
3 Microphone jack
4 USB 3�0
5 Power button/Power LED
6 HDD LED/reset button
7 3-step fan controller
7.4 The function panel has several wire connections that need to be installed.
HD audio (headphone jack/microphone jack)
Find the "Front panel audio headers/pin connectors" on the
motherboard� Plug in the wires according to the motherboard
manual�
USB 2.0
Find the "USB 2�0 Headers/pin connectors" on the motherboard�
Plug in the wires according to the motherboard manual�
USB 3.0
Find the "USB 3�0 Headers/pin connectors" on the motherboard�
Plug in the wires according to the motherboard manual�
Power switch, Power LED, HDD LED, Reset switch
These wires plug into the motherboard where all the front panel
switch/pin connectors functions are located� The motherboard
manual will have a description of where to plug these in, usually
their location is labeled in the motherboard manual�
3-step fan controller
The fan controller is powered by a SATA connector that has to be
connected directly to the power supply� The controller is able to
control up to three 3-pin fans� Plug in the 3-pin connector of the
fan controller into the plug of your 3-pin fan�
8. STEP-BY-STEP INSTALLATION
8
�����������������������������������������������������������������������������������������
5
6
1 4
2 3
7
KEY
KEY
KEY
POWER SW
POWERLED +
POWERLED -
H.D.D LED
RESET SW
KEY
KEY
29