Connecting The Iptv Set-Top Box - Pace 4112N Installation Manual

HomePortal® 4111N/4112N Intelligent Gateway Installation Guide

Connecting the IPTV Set-top Box

The gateway can be configured to use IPTV services through the Local Ethernet port.
To connect the gateway and the set-top box:
1. Connect one end of the Ethernet cable to the Local Ethernet port of the gateway.
2. Connect the cable's other end to the Ethernet port of the set-top box.
As soon as the gateway recognizes the set-top box, the relevant Ethernet LED turns steady green, and then
starts flickering once the set-top box starts data transfer with the gateway.
Note Refer to the set-top box manufacturer's instructions for further information.
Figure 8: IPTV Connection Over Local Ethernet
See Also
Troubleshooting Installation Issues

Connecting the IPTV Set-top Box

on page 8
Installing the HomePortal Intelligent Gateway
7