Connecting The Broadband Interface Through Dsl Port; Connecting The Broadband Interface Through The Ethernet Port - Pace 4112N Installation Manual

HomePortal® 4111N/4112N Intelligent Gateway Installation Guide

Connecting the Broadband Interface through DSL port

To connect the gateway to an Asymmetric Digital Subscriber Line (ADSL) wall jack:
1. Connect one end of the phone cord/twisted pair cable to the DSL port (green-colored) on your
gateway.
2. Connect the cable's other end to the DSL port of the filter, which must be plugged into the ADSL-
enabled wall jack outlet.
Once the gateway recognizes the ADSL connection, the Broadband LED blinks green for a brief period of time,
and then turns steady green.
Figure 6: ADSL Broadband Connection
The gateway must be connected through the DSL phoneline filter.
Note

Connecting the Broadband Interface through the Ethernet Port

To connect the gateway to a RJ-45 jack of the fiber optic device:
1. Connect one end of the Ethernet cable to the Ethernet port (yellow-colored) on your gateway.
2. Connect the cable's other end to the Broadband device.
Once the gateway recognizes the Ethernet connection, the Broadband LED blinks green for a few seconds, and
then turns steady green.
Figure 7: Ethernet Broadband Connection

Connecting the Broadband Interface through DSL port

Installing the HomePortal Intelligent Gateway
6