Computer Interface Software Control Functions; Accessories - DIGISYNTHETIC K3 Manual

22 When on-line computer interface software control the processor
functions Online, the panel can not operate.
COM Port Detect Automatically.
Software can set all the parameters of the processor.
Please refer to the corresponding HELP documentation software instruction.
USB and RS232 cannot operate together. If RS232 interface is needed, please remove USB connection.
3 Important instruction on PC control
Please read the following instruction carefully before doing the connection.
Or there is more risks on abnormal conditions as offline, computer crash.
Please assure the AC power applies with the machine working condition.
The ground connection should be set with AC power.
Please use the AC power to connect the computer with the machine.
Do not install the control software with the same version and model repeatedly.
Do not load all the software in the same catalogue. Advise to set the separate file folder for saving the software.
Try to avoid doing the PC software control operation in the condition with strong signal interference.
The wrong operation will lead to fail controlling and even damage the machine and the computer.
a.Do not insert or pull out the connection interface at the power on condition before PC connection..
b.Do not move the computer, the machine and the connecting cable after PC connection.
c.Do not use the panel operation or touch the key on the panel after PC connection.
d.Do not insert or pull out the connection interface of the computer and the machine after successful
PC connection.
E.Do not use one computer to control several machines.
Please refer to IMPORTANT SAFETY INSTRUCTION in the user instruction.
Computer

24 Accessories:

Accessories
RS232 Computer Communication lines
Software CD
USB computer communication line
Manual
Remote Control
Iterface
Qty
1
1
1
1
1
25
GROUNDING
AC Power