Sub Woofer Peq Settings; Sub Woofer Music Delay Set Direct Sound To The Sub Woofer Volume Settings; Sub Woofer Limit Settings - DIGISYNTHETIC K3 Manual

10.3 Sub woofer PEQ settings

PEQ qty : 3
Type: parametric equalization filter (can be set to low / treble tone filter) and graphic equalizer
Frequency range: 20hz ~ 20khz
Gain Range:-15db ~ +12 db, stepping 0.1db
Bandwidth range: 0.011 to 3.595
Operation method 1: (Only can set EQ gain on the panel)Press the buttons "Sub Woofer Mode" on the panel
continuously into the SUB PEQ, as shown below:
Panel
Keys "<" and ">" to select the needing PEQ
Turning knob "music volume / edit (press) "to set gain
Operating method 2: Operation from the interface software to set up
(all the parameter of EQ can be set)
10.4 Subwoofer music delay, direct sound to the Subwoofer volume settings
Subwoofer music delay range: 0 ~ 20ms, stepping 0.5ms
Direct sound to the subwoofer range: MUTE,-30db ~ 0db, Stepping: 0.5db
Operation method 1: Press the buttons "MIC Mode" on the panel continuously into the Subwoofer music delay and
Direct sound to the subwoofer volume, as shown below:
Panel
Keys "<" and ">" to switch Subwoofer music delay and Direct sound to subwoofer volume
Turning knob "music volume / edit (press) "to set gain
Operating method 2: Operation from the interface software to set up
SUB PEQ3 120Hz
+ 6
- 6
SUB MUS DELAY:
MIC DIR TO SUB: 0.0dB
20
+ 10.0
Display
Panel
0.0ms
Display
Panel