Left & Right Delay Settings Of Main Output; The Main Output Limit Settings - DIGISYNTHETIC K3 Manual

Keys "<" and ">" to switch the needed PEQ.
Turning knob "music volume / edit (press) "to set Gain.
Operating method 2: Operation from the interface software to
set up(all equalizer parameter can be set )
Panel
8.5 Main output left delay, right-delay setting
Range: 0.0ms ~ 5.0ms, stepping 0.1ms
Operation method1: Press the buttons "Main output Mode" on the panel continuously into the Main output delay,
turning knob "usic volume / edit (press) "to set.
Operating method 2: Operation from the interface software to set up
8.6 Main output compression settings
Threshold range: -20 ~ +16 db, stepping 0.5db
Ratio: 2:1 4:1 8:1 16:1 32:1 64:1 128:1
Range: On, Off
Operation method1: (Only can set Threshold range and Ratio)Press the buttons "Main output Mode" on the panel
continuously into the Main output compression, as shown below:
MUS COMP:
OUT
+16
THRES RATIO
-20 -7.0dB 2:1
In
Panel
Display
Keys "<" and ">" to switch the Threshold Rang and Ratio.
Turning knob " usic volume / edit (press) "to set.
Operating method 2: Operation from the interface software to set up
Panel
16