Output Volume Setting; Music To Center Volume Settings; Main Output Peq Settings - DIGISYNTHETIC K3 Manual

8.2 Direct sound to the main output, and the effect to the main output volume setting
Range: Mute,-30db ~ 0db, Stepping: 0.5db
Operation: Press the buttons "Main output Mode" on the panel continuously into the Direct sound to main output and
Effect to the main output volume, as shown below:
Panel
Keys "<" and ">" to switch the needed parameters.
Turning knob "music volume / edit (press) "to set
Operating method 2: Operation from the interface software to set up
8.3 Music to the main output volume settings
Range: Mute,-30db ~ 0db, Stepping: 0.5db
Operation: Press the buttons "Main output Mode" on the panel continuously into the Music to main output volume,
as shown below:
Panel
Turning knob " usic volume / edit (press) "to set
Operating method 2: Operation from the interface software to set up

8.4 main output PEQ settings

The PEQ qty: 5
Type: parametric equalization filter (can be set to low / treble tone filter) and graphic equalizer
Frequency range: 20hz ~ 20khz
Gain Range:-15db ~ +12 db, step 0.1db
Bandwidth range: 0.011 to 3.595
Methods of operation: (panel can only set the equalizer gain)Press the buttons "Main output Mode" on the panel
continuously into the MAIN PEQ, as shown below:
As shown below:
Panel
MIC DIR TO MAIN
EFF TO MAIN
Display
MUS TO MAIN:
MAIN PEQ
+ 6
- 6
15
5.0dB
0.0dB
Panel
0.0dB
Display
1 101Hz
0.0
Display