Sub Woofer High & Low-Cut Settings - DIGISYNTHETIC K3 Manual

10 The Sub woofer part operating instructions
10.1 Sub woofer volume and phase settings
Volume range: mute,-30db ~ 0db, Stepping: 0.5db
° °
Phase range: 0 , 180
Operation method 1: Press the buttons "Sub Woofer Mode" on the panel continuously into the Sub woofer volume and
phase, as shown below:
Panel
Keys "<" and ">" to switch the Sub woofer volume and phase
Turning knob "music volume / edit (press) "to set
Operation method 2: Press the keys "bass +" and "bass" on the remote control
Operating method 3: Operation from the interface software to set up
Panel
10.2 High-cut, Low-cut setting
Low-cut range: 19.7 ~ 1000hz,, 203 stepper
High-cut range: 35.1 ~ 2000hz, 209 stepper
Operation method 1: Press the buttons "Sub Woofer Mode" on the panel continuously into the Low-cut and High-cut,
as shown below:
Panel
Keys "<" and ">" to switch the High-cut and Low cut
Turning knob "music volume / edit (press) "to set
Operating method 2: Operation from the interface software to set up
SUB VOL
PHASE
SUB
+
SUB
REMOTE CONTROL
REMOTE CONTROL
HPF:
19.7Hz
OUT
19
19.5dB
[0 ]
Display
BAL
CENT +
+
CENT -
BAL
LPF:2000Hz
SUB FREQ
Display
Panel