Master Tv Profile Setup Learning/Teaching With Usb Memory Card - LG 47LD650H Manual

COMMERCIAL MODE SETUP
MASTER TV PROFILE SETUP LEARNING/TEACHING WITH USB
MEMORY CARD
On Master TV, Create Profile and Learn
1. Set up all Master TV features on the menus and do
a Channel Search. Add Channel and Aux Labels etc.
Do 255+menu on Installer Menu to save current TV
into flash memory.
2. Plug a USB memory drive into the USB In port on
the master TV.
3. Press the Menu key to open the Main menu.
Highlight the Option icon.
4. Press the Left arrow key once, the Option icon on
left side of menu will be highlighted.
5. Press number key '7' a total of 7 times.
6. Gain access to "Learn From TV".
A. First, the Expert Download Menu page will not
show the "Learn From TV" option. In order to make
it available, key in the password which is used to
USB Download Menu
Upgrade TV Software
Upgrade TV Software
Teach To TV
Learn From TV
Learn From TV
Optional: Edit/Change File Name
If necessary, the file name can be edited or changed.
For 32/37/42LG710H
Learn From TV
Select the file name and press OK to start
For 32/37/42/47/55LD650H
Learn From TV
Select the file name and press OK to start
98
xxLG710H-UA00001.TLL
E
Previous Enter
xxLD650H-UA00001.TLL
E
Previous Enter
enter Installer Menu. Example 9-8-7-6.
B. By pressing the up/down arrow keys(if there are
other menus), place the cursor on Learn From TV,
then press the Enter Key.
7 . Using the Up/Down arrow keys, highlight "Learn
From TV" and then press Enter.
8. To identify this profile from others, you can change
the last 5 digits. Key in a custom file name and
then press the Enter key.
9. The Learning status will be shown in the progress
bar. As soon as learning is complete, a message will
appear on the screen indicating the learning process
is done.
10. Remove the USB memory card.
!
Learn From TV
UPGRADING...
Do not unplug!
!
NOTES
Do not remove TV power cord or USB memory
G
card while Learning, doing so might harm your
USB memory card.
Do not remove TV power cord or USB memory
G
card while Teaching, doing so may cause the TV
to malfunction.
You are allowed to edit the file name, however, a
G
file with edited contents will not be recognized.
Since clock data is copied into USB memory card
G
as numeric data, the time difference between
teaching and learning is not automatically adjust-
ed. Either set the clock manually, or use Auto
Clock set on TV main menu.
100%