Contents Precautions Shot Setup Fixing the Camera to the Universal Clip Overview Attaching the Camera to Mounts Rear Hatch Using the Camera Lens Rotation Initial Setup Connectivity Powering On and Off Charging Connecting to Windows PC Battery Life Connecting to Mac External Power Supply Connecting to WiFi device Micro SD Cards...
Back Hatch open, in less then 30% humidity. Weather resistance Never open the Back Hatch in damp The Stealth 2 is engineered to be resistant to dust, snow, rain and splashes. or humid conditions if possible. The camera is NOT waterproof without the waterproof case. •...
The camera can be powered by an external power supply such as a USB power To remove the card, push it until you hear adapter, Drift Power Pack or Drift 12V Charger. We recommend you power off a click. The card slot is spring loaded and your camera before plugging into any external power supply.
CYCLE OPTION Button ACTION Button (On/Off/Rec/Stop) LED Indicator Figure 8: Stealth 2 Top View Current Mode The Drift Stealth 2 has an easy-to-use menu system which can be navigated using the camera’s three control buttons. 25 FPS 1080p Mode Selection 12:05:59 The Mode Selection menu is used to select the camera mode.
Frame Rate 3. Press the cycle to switch between video resolutions. (720 / WVGA) The Stealth 2 will only toggle between resolutions of either NTSC or PAL (WVGA) standards. This can be changed in the settings menu, under ‘video standard’, (WVGA) see page 13.
Page 8
Video Mode Video Tagging Figure 13: Video Tagging Illustration When activated, this feature allows the camera to continuously record video, but 25 FPS 1080p save only ‘tagged’ footage. For example, with Video Tagging turned on and a Video Tagging Interval of 30s selected, pressing MENU while recording video will save the previous 30s, the current 30s and an additional 30s—a total of 1m30s of tagged footage.
Page 9
Video Mode Taking simultaneous photos while recording video With Video Tagging turned off, pressing MODE on the camera while recording video will simultaneously take a still photo. Simultaneous Photo is available in the following video setups: 1080p (30/25 FPS), 960p (30/25 FPS), 720p (30/25 FPS), WVGA (30/25 FPS).
Photo Mode Photo Mode Settings PHOTO MODE (YELLOW LED) Resolution 3/5/12MP While the camera is powered on and in Photo Mode—with a compatible micro 135° SD card inserted with available memory—it will capture a still image when ACTION is pressed on the camera or the remote control. 1.
Timelapse Mode TIMELAPSE MODE (PURPLE LED) Timelapse Mode Settings While the camera is powered on and in Timelapse Mode—with a compatible Resolution micro SD card inserted with enough free memory—it will capture a series of still 135° images at a specified rate when ACTION is pressed on the camera or the remote 0.5s control.
Photoburst Mode PHOTOBURST MODE (CYAN BLUE LED) Photoburst Mode Settings While the camera is powered on and in Photoburst Mode—with a compatible Resolution micro SD card inserted with enough free memory—it will capture a burst of still 135° images for an allotted duration, at a rate of 3 images a second when ACTION is Capture Rate pressed on the camera or the remote control.
Press ACTION to switch between ON and OFF. Video Tagging WiFi Network Name Camera Auto Off Your Stealth 2 will come with the SSID Video Tagging programmed to be: ‘Stealth 2_XXXXX’ Interval where XXXXX is the last 5 characters of your camera’s unique serial number.
Please note: The Two-Way Remote Control is an accessory for purchase (see driftinnovation.com for more info) but is NOT included in the purchase of the Stealth 2. Charging Connect the remote control using the Mini USB cable (provided) to a powered USB port.
Page 15
Two Way Remote Control (cont’d) Pairing camera to a remote control - one to all ‘RC 1-ALL’ A single remote control can be paired to an infinite number of cameras in a 10m range from the remote control, to enable footage to be captured from every angle.
Be sure to rotate the lens back to Mounting the camera to a Drift mount the 0° position (so the ‘up’ indicator Included with the camera are several Drift mounts which will help you find the on the lens is aligned with the shot you want.
My Computer editing video or do not wish to use 3. Your PC should recognise the camera as a removable device—look for DRIFT VLC player for playback, you will need CARD in the list of devices and open to download and install a codec pack.
Conserving Battery The Stealth 2 has an internal rechargeable 1500mAh Lithium-Ion battery, allowing you to record continuously for hours between charges. The camera’s LCD screen consumes power, so one of the best ways to extend battery life is to use the ‘Backlight Timer’ feature.
‘’Stealth 2.bin’’ firmware file into the root folder of the ‘’Drift Card’’ Micro SD card 4) Safely eject your Drift Stealth 2 and Micro SD as a storage device from your computer 5) Power on the camera and wait for it to automatically update itself. You will get a “Firmware update in Progress”...
Camera Care The Stealth 2 is specifically designed for extreme sports. It is a very durable piece of equipment. However, to ensure a long and healthy life for your camera, please follow the guidelines below. Cleaning the camera During your sporting activities, the camera will inevitably get dirty or wet.
Warranty Drift Innovation (“Manufacturer”) warrants to the original End User (“Purchaser”) Service that this product purchased from us or any authorized dealer is free from To obtain our warranty service, register manufacturing defects in material and workmanship for the applicable warranty your product at driftinnovation.com.
Disclosures FCC Information Motorcycle Disclaimer This device complies with Part 15 of the FCC Rules. Interacting with the camera while riding could cause a crash and you or others Operation is subject to the following two conditions: may be seriously injured or killed. 1.
Page 25
Thank you for purchasing the Drift Stealth 2 CUSTOMER SUPPORT Check our official website for firmware updates, customer support, news about our products and videos from our users. about your camera | initial setup 3—4 If you have any suggestions, comments or concerns, please...
about your camera initial setup MODE/ Tag / Simultaneous Photo Button 1. Unscrew and remove CYCLE OPTION Button the rear hatch ACTION Button 2. Insert a Class 10 or (On/Off/Rec/Stop) higher Micro SD/HC Status LED card (up to 32GB) Format before first Lens “Up”...
package contents getting started Universal Clip USB Cable (Micro-B) POWER ON AND OFF MODE NAVIGATION To change the current 1. Press and hold the 25 FPS 1080p camera recording mode ACTION button to 12:05:59 press the [MODE] button, power on changing between;...
mode selection settings VIDEO MODE PHOTO MODE PHOTOBURST MODE CAMERA SETTINGS (Cyan LED) The camera (Green LED) The camera (Yellow LED) The camera •EXPOSURE -2.0 / -1.0 / 0 / +1.0 / +2.0 •DATE YEAR / MONTH / DAY will capture a burst of still will record video when will capture still images •SELF-TIMER...
MODE INDICATOR VIDEO TAGGING the loop recording, but (see Tagging Screen-Shot VIDEO MODE without saving any footage. The Drift Stealth 2 features below) While recording video, This hands off mode setting When activated, this feature a multi-coloured status The LED will be blinking...
Get connected with the Drift Become immersed with the Attach your Drift camera to Two-Way remote control. Stealth II Waterproof Case. any vented bike, ski, or similar...
USB cable using the USB cable powered off, connect option and press ACTION, on your device. and copy the STEALTH 2.bin (provided); the camera (provided); the camera the camera using a micro and select P and press file to a formatted micro...
specifications Video resolution: 1080p, 720p and WVGA (16:9); 960p (4:3) Memory capacity: Micro SD memory cards up to 32GB File format: .MP4 (H.264 codec) Outputs: Micro HDMI connector - type D (cable not included) Sensor type: CMOS Connectivity: USB Plug and Play, micro-B USB connector Frame rate:- Compatibility: Windows XP and up / Mac OS 10.2 and up...
disclosures FCC Information The equipment has been harmful interference to radio or This device complies with de l’intervention, y compris This transmitter must not be tested and found to comply television reception, which can Industry Canada license- l’intervention qui peut causer co-located or operating in This device complies with Part with the limits for a Class B...
Page 34
Merci pour votre achat de la nouvelle caméra Drift Stealth 2 SERVICE CLIENTELE Consultez notre site internet officiel pour les mises à jour système, le service client, les nouveautés et les vidéos des a propos de votre caméra | configuration initiale 21—22...
Page 35
a propos de votre caméra configuration initiale MODE/ Tag / Bouton photo simultané 1. Dévissez et retirez la Bouton CYCLE (Options cycliques) porte arrière 2. Insérez une carte Bouton ACTION Micro SD/HC (jusqu’a (On/Off/Rec/Stop) 32GB) Classe 10 ou Indicateur LED supérieure Indicateur orientation lentille Formatez-la avant la...
Page 36
contenu du kit pour commencer Clip Universel ALLUMER ET ÉTEINDRE LA MODE NAVIGATION Câble USB (Micro-B) CAMÉRA Pressez le bouton [MODE] 25 FPS 1080p afin de changer le mode 1. Pour allumer la caméra, 12:05:59 de la caméra, vous pouvez effectuez une pression longue choisir entre: Vidéo, Photo, sur le bouton...
Page 37
sélection des modes paramètres d’images de 30 (30, 60, 120) capturer une série de photos MODE VIDEO RÉGLAGE DE LA CAMÉRA images par seconde alors à intervalles réguliers, après (LED Verte) La caméra va •EXPOSITION -2.0 / -1.0 / 0 / +1.0 / +2.0 •RETROÉCLAIRAGE LCD ON / OFF que PAL utilise une fréquence...
Page 38
Cette fonctionnalité n’est pas Drift. bouton ACTION présentet futur. L’indicateur de 30s suivante : soit un disponible quand le mode ‘Vidéo La Drift Stealth 2 est EXP -2 PHOTO MODE affiché sur l’écran montrera fichier video de 1min30s. Flashback’ est activé.
Page 39
1. Attachez le clip universel 2. Glissez le clip universel 3. Faites pivoter la lentille TÉLÉCOMMANDE INTERACTIVE CAISSON ÉTANCHE FIXATION DRIFT CASQUE à la camera selon l’angle dans la fixation désirée, manuellement jusqu’à ce STEALTH 2 VENTILÉ souhaité, en vissant la en s’assurant d’entendre...
Page 40
USB (fourni); l’écran de (fournis); l’écran de la micro HDMI (Type D), surbrillance et presser vos vidéos sur votre STEALTH 2.bin à la racine de la la camera affichera un camera affichera un disponible dans la gamme le bouton ACTION, Smartphone.
Page 41
spécifications Résolution Video: 1080p, 720p et WVGA (16:9); 960p (4:3) Mémoire interne: 256MB (inaccessible par l’utilisateur) Format de fichier: .MP4 (H.264 codec) Capacité de mémoire: Carte micro SD jusqu’a 32GB Type de capteur: CMOS Sortie Vidéo: Connecteur micro HDMI - type D (câble vendu séparément) Image par secondes:- Connectique: USB, connecteur micro-B USB...
Page 42
certifications légales Informations FCC de l’utilisateur à utiliser Si cet équipement provoque Cet appareil est conforme avec de l’intervention, y compris Cet émetteur ne doit pas être l’appareil.L’équipement a été des interférences nuisibles à la les standards RSS de l’ Industrie l’intervention qui peut causer co-localisées ou opérant en Cet appareil est conforme à...
Page 43
Vielen Dank, dass Sie sich für die Drift HD Ghost entschieden haben KUNDENSERVICE Auf unserer offiziellen Internetseite finden Sie Firmware-Updates, Kundenservice, Neuigkeiten über unsere Produkte und Videos. Wenn über Ihre Kamera | ersteinrichtung 39—40 Sie Anregungen, Kommentare oder Fragen haben, wenden Sie sich...
über Ihre Kamera ersteinrichtung MODUS/ Tag / Gleichzeitige Fotoaufnahme 1. Verschlussklappe lösen NAVIGATIONS-Taste und entfernen 2. Class 10 oder höhere AKTIONS-Taste Micro SD/HC Karte (bis (On/Off/Rec/Stop) zu 32GB) einlegen LED-Status Vor der ersten Bildindikator Verwendung formatieren! Verschlussklappe 3. Kamera über Micro 1.3”...
lieferinhalt erste Schritte Universal-Clip USB-Kabel (Micro-B) EIN- UND AUSSCHALTEN MODUSAUSWAHL Um den aktuellen 1. Drücken und halten Sie die 25 FPS 1080p Aufnahmestatus zu ändern, AKTIONS-Taste gedrückt, 12:05:59 drücken Sie die [MODE] um das Gerät einzuschalten Taste. Dadurch schalten 2. Der Bildschirm leuchtet Sie zwischen Video, Foto, EXP -2 auf Willkommensanzeige...
Page 46
modusauswahl einstellungen während PAL Bildraten Kamera AKTIONS-Taste VIDEOMODUS Kameraeinstellungen von 25 (25, 500, 100) FPS auf der Kamera oder (Grüne LED) Die Kamera •BELICHTUNG -2.0 / -1.0 / 0 / +1.0 / +2.0 •LCD HELLIGKEIT TIMER AUS / 5S / 10S / 20S / 1MIN verwendet.
CAR DVR MODUS VIDEO MODE ist mit der Zwei- Screen-Shot unterhalb). AKTIONS-Taste eine Class 10 Micro SD Karte mit Die Drift Stealth 2 besitzt Dieser Modus ist ideal PHOTO MODE Wege-Fernbedienung 4GB freiem Speicherplatz um ein mehrfarbiges Satus- startet die Aufnahme, aber ohne für Versicherungs- und...
Page 48
Schließsystem führt zu einem für belüftete Helme. Änderungen des Modus und dient absolut dichtem Verschluss und durch die LEDs zur Kontrolle ob austauschbare Linsen ergeben man aufnimmt. immer ein glasklares Bild. *Info: Das komplette Drift Zubehör finden Sie unter driftinnovation.com...
Page 49
USB-Symbol an D) mit einem Full-HDMI- Wiedergabe auf 2. Der Ordner der Kamera Sie P . Drücken Sie dann Kabel, die bei allen Drift- Ihrem Gerät Legen Sie die Micro SD-Karte öffnet sich automatisch; 2. Der Ordner der Kamera erneut auf die AKTIONS- Einzelhändlern erhältlich...
technische daten Videoauflösung: 1080p, 720p und WVGA (16:9); 960p (4:3) Speicherkapazität: Micro SD Speicherkarten bis zu 32 GB Dateiformat: .MP4 (H.264 Codec) Ausgänge: HDMI-Anschluss Typ D (Kabel nicht enthalten) Sensortyp: CMOS Konnektivität: USB Plug and Play, Micro-B USB-Stecker Bildrate:- Kompatibilität: Windows XP and up / Mac OS 10.2 and up 1080p: 25 / 30 fps...
hinweise FCC Informationen das Recht zur Benutzung des auftreten. Wenn dieses Gerät Dieses Gerät erfüllt die (2) cet appareil doit accepter gemeinsam oder in Verbindung Gerätes unwirksam machen.Das Störungen bei Radio- und lizenzfreien RSS-Standards des de l’intervention, y compris mit einer anderen Antenne Dieses Gerät erfüllt Teil 15 der Gerät wurde getestet und erfüllt Fernsehempfang verursacht, was...
Page 52
Gracias por comprar la cámara Drift Stealth 2 SERVICIO DE ASISTENCIA AL CLIENTE Consulte nuestro sitio web oficial para actualizar el firmware, asistencia al cliente, noticias sobre nuestros sobre la cámara | configuración inicial 57—58 productos y vídeos de los usuarios. Si tiene cualquier sugerencia, comentario o duda, póngase en contacto con...
sobre la cámara configuración inicial Botón MODE/ Etiqueta / Foto simultánea 1. Desenrosque el tornillo y Botón de CYCLE OPTION retire la tapa posterior Botón ACTION 2. Inserte una tarjeta micro SD/ (On/Off/Rec/Stop) HC de clase 10 o superior LED de estado (hasta 32 GB).
contenido del paquete inicio Clip universal Cable USB (Micro-B) ENCENDER Y APAGAR NAVEGACIÓN DE MODOS Para cambiar el modo 1. Mantenga pulsado el botón 25 FPS 1080p actual de grabación de ACTION para encenderla 12:05:59 la cámara pulse el botón 2.
Page 55
selección de modo configuración MODO VÍDEO lo hace a intervalos de 25 instantáneas al ritmo configuración de la cámara (25, 50, 100) FPS. determinado al pulsar el (LED verde) La cámara •EXPOSICIÓN -2.0 / -1.0 / 0 / +1.0 / +2.0 •LCD BACKLIGHT TIMER DE PANTALLA LCD OFF / botón ACTION de la cámara...
30 s cuando está habilitado el PHOTO MODE compatible con el control comenzará La cámara Drift Stealth 2 EXP -2 verde de la pantalla se anteriores, los 30 s actuales etiquetado de vídeo (izquierda). remoto Drift Two-Way cuenta con un sistema de la grabación en bucle,...
Conéctese con el control Sumérjase con el estuche Sujete la cámara Drift a remoto Drift Two-Way impermeable para Stealth cualquier casco ventilado Iniciar/finalizar grabación, II. El sistema de doble cierre para bicicleta, esquí...
Page 58
1. Conecte la cámara 1. Conecte la cámara 1. Cuando la cámara esté configuración de la cámara, fotografía, reciente en el sitio web de Drift mediante el cable USB mediante el cable USB apagada, conéctela resalte la opción “WiFi” y grabación, captura...
especificaciones Resolución de vídeo: 1080 p, 720 p y WVGA (16:9); 960 p (4:3) Memoria integrada: 256MB (no accesible al usuario) Formato de archivos: .MP4 (códec H.264) Capacidad de memoria: Tarjetas de memoria micro SD de hasta 32 GB Tipo de sensor: CMOS Salidas: Conector micro HDMI, tipo D (cable no incluido)
declaraciones Información FCC del usuario a hacer funcionar Si este equipo provoca Este dispositivo cumple las (1) cet appareil ne peut pas radiador y su cuerpo. el aparato. Este producto ha interferencias perjudiciales normas RSS de exención causer l’intervention, et Este transmisor no debe ser Este dispositivo cumple la parte sido sometido a pruebas y se ha...
Page 61
Grazie per avere acquistato la fotocamera Drift Stealth 2 ASSISTENZA ALLA CLIENTELA Consulta il nostro sito web ufficiale per ottenere aggiornamenti firmware e assistenza, leggere notizie sui informazioni sulla fotocamera | impostazioni iniziali 75—76 nostri prodotti e vedere i video dei nostri utenti. In caso di...
informazioni sulla fotocamera impostazioni iniziali MODALITÀ/ Tag / Tasto foto simultanea Tasto OPZIONE CICLO 1. Svitare e rimuovere il portello posteriore Tasto AZIONE 2. IInserire una scheda Micro (On/Off/Rec/Stop) SD/HC di Classe 10 o LED di stato superiore (fino a 32GB) Indicatore lente verso l’alto Formattare prima di utilizzarla per la prima...
contenuto della confezione per iniziare Clip universale ACCENSIONE E SPEGNIMENTO NAVIGAZIONE NELLE Cavo USB (Micro-B) MODALITÀ 1. Premere e tenere premuto 25 FPS 1080p Per cambiare la modalità il tasto AZIONE per 12:05:59 di registrazione corrente, accendere la fotocamera premere il tasto 2.
selezione modalità impostazioni trasmissione di 30 (30, 60, di fotografie a una data MODALITÀ VIDEO impostazioni 120) f/s, contro una velocità velocità quando si preme (LED verde) La fotocamera •ESPOSIZIONE -2.0 / -1.0 / 0 / +1.0 / +2.0 •RETROILLUMINAZIONE LCD ON / OFF di trasmissione di 25 (25, AZIONE sulla fotocamera o...
MODALITÀ DVR con il telecomando Drift LED lampeggia in rosso. una scheda micro SD di classe AUTOMOBILE La Drift Stealth 2 presenta la registrazione in loop, ma bidirezionale 10 con 4GB di spazio libero per un sistema di spie di (vedere in basso la Questa modalità...
Collegarsi con il telecomando Il guscio impermeabile Stealth È possibile attaccare la Drift bidirezionale. Avviare/ II è l’ideale per immergersi fotocamera Drift a qualsiasi arrestare la registrazione, senza problemi. Il sistema di casco ventilato per bicicletta, cambiare modalità ed doppio bloccaggio a tenuta...
Page 67
USB (in usando il cavo USB (in collegare la fotocamera fotocamera, evidenziare registrare, scattare e copiare il file STEALTH 2.bin su dotazione); lo schermo dotazione); lo schermo usando una HDMI micro l’opzione ‘WiFi’, premere foto e girare video e una scheda micro SD formattata.
specifiche Risoluzione video: 1080p, 720p and WVGA (16:9); 960p (4:3) Capacità memoria: Schede di memoria Micro SD fino a 32GB Formato file: .MP4 (H.264 codec) Uscite: Connettore Micro HDMI - tipo D (cavo non in dotazione) Tipo sensore: CMOS Connessioni: USB Plug and Play, connettore USB micro-B Velocità...
altre informazioni importanti Informazioni FCC l’autorizzazione dell’utente questo dispositivo dovesse Questo dispositivo rispetta lo/gli l’intervention qui peut causer fatto funzionare in collegamento di utilizzare il dispositivo. Il causare interferenze dannose standard RSS esenti da licenza l’opération non désirée de. con altre antenne o altri Questo dispositivo rispetta la dispositivo è...
Page 70
follow us facebook.com/driftinnovation vimeo.com/driftinnovation twitter.com/driftinnovation DRIFTINNOVATION.COM...
Need help?
Do you have a question about the Stealth 2 and is the answer not in the manual?
Questions and answers