Pioneer DDJ-SX2 Operating Instructions Manual page 21

3 Press the effect parameter 1 button while pressing the
[SHIFT] button to select the first effect type.
To select the second effect type, press the effect parameter 2 button while pressing
the [SHIFT] button.
To select the third effect type, press the effect parameter 3 button while pressing the
[SHIFT] button.
The currently selected effect type is displayed on the Serato DJ screen.
4 Press the effect parameter 1 button to turn the first effect on.
Press the effect parameter 2 button to turn the second effect on.
Press the effect parameter 3 button to turn the third effect on.
The [ON] key for the corresponding effect is highlighted on the Serato DJ screen.
5 Operate the effect parameter 1 control to adjust the
parameter of the first effect.
Operate the effect parameter 2 control to adjust the parameter of the second effect.
Operate the effect parameter 3 control to adjust the parameter of the third effect.
6 Turn the [FX BEATS] control to adjust the effect time.
! It is also possible to set the BPM value to be used as the basis for the effect time
from the interval at which the [TAP] button is tapped.
= Switching the effect's tempo mode (p. 21 )
Operating in the single FX mode
1 Press the [TAP] button while pressing the [SHIFT] button to
switch Serato DJ's DJ-FX mode to the single FX mode.
The mode switches between the multi FX mode and single FX mode each time the
buttons are operated.
2 Press the [FX1] button or [FX2] button of channel 1 to select
the effect unit to assign.
INST. DOUBLES
FLIP
SLOT REC START
SAVE LOOP ON/OFF
SYNC OFF
CUE LOOP SAVED LOOP SLICER LOOP VELOCITY SAMPLER
4 BEAT
The number of the deck to which the effect is assigned is highlighted on the Serato
DJ screen.
INST. DOUBLES INST. DOUBLES INST. DOUBLES
FLIP
SLOT REC START
SAVE LOOP ON/OFF
SYNC OFF
CUE LOOP SAVED LOOP SLICER LOOP VELOCITY SAMPLER
4 BEAT
3 Press one of the effect parameter buttons while pressing
the [SHIFT] button to select the effect type.
The selected effect is displayed on the Serato DJ screen.
4 Press the effect parameter 1 button to turn the effect on.
The effect switches between on and off each time the button is pressed.
! The effect's [ON] key is highlighted on the Serato DJ screen.
5 Operate the effect parameter 2 button or the effect
parameter 3 button to switch the effect's parameter.
! Depending on the type of effect, the button may not light when it is operated.
6 Operate the effect parameter control(s) to adjust the
effect's parameter(s).
7 Turn the [FX BEATS] control to adjust the effect time.
! It is also possible to set the BPM value to be used as the basis for the effect time
from the interval at which the [TAP] button is tapped.
= Switching the effect's tempo mode (p. 21 )
Switching the effect's tempo mode
With Serato DJ effects, there are two ways to set the effect's tempo: with the "auto
tempo mode" and the "manual tempo mode".
! By default, the auto tempo mode is set.
 Auto tempo mode
The track's BPM value is used as the basis for the effect's tempo.
 Manual tempo mode
The BPM value used as the effect's basis is calculated from the interval at which the
[TAP] button is tapped.
 Switching to the manual tempo mode
While in the auto tempo mode, press the [TAP] button three
times.
! When the [TAP] button is pressed for over 1 second while in the manual-tempo
mode, the mode switches to the auto tempo mode.
21
En