Remote-Pager Button Functions - CompuSTAR 2WSSR User Manual

Icon Explanation
Shock
Indicates if the Shock Sensor is on or off. See page 12.
Turbo
Indicate if Turbo Mode is on or off. See page 17.
Timer
Indicates if Timer Start Mode is on or off. See page 16.
Passive Indicates if Passive Arming Mode is on or off. See page 17.
Indicates that the second stage shock sensor has been triggered.
If the icon appears continuously, you are in mute(vibration) mode. If the
icon blinks, the first stage shock sensor has been triggered. See page 15.
Indicates if you are in Valet Mode. See page 15.
Indicates if your car parking lights are flashing.
Indicates that your car siren is turned on or off when you lock or
unlock the vehicle.
Indicates that someone is paging you from your vehicle.
Displays if your car is locked or unlocked.
Indicates if your remote-pager is transmitting signals to the controller unit.
Displays remaining battery life.
Displays if your door is open.
Displays if your vehicle has auto-started properly or ignition on.
Displays if your trunk is open.
Page 8

Remote-Pager Button Functions

The user can activate differing functions of CompuStar 2WSSR system by pressing
one or two buttons simultaneously (ex.(I+IV) ) located on the antenna side of your
Compu Star remote-pager.
Channel Button Press for
1/2 sec
Alarm Mode - on/off, RPS - on/off
1 I
1/2 sec
2 II Auxiliary Option 1
1/2 sec
3 Auxiliary Option 2
III
1/2 sec
Query Function
4 IV
2 sec
5 Alarm Mode - on/off, RPS - on/off
I-
2 sec
6
II- Auto-start Function - on/off
III - 2 sec
7 Trunk Release - on/off
2 sec
8 Panic Mode
IV-
1/2 sec
9
( I+ II) Car Siren for Lock/ Unlock-on/off
1/2 sec
10
Valet Mode - on/off
( I+ III)
1/2 sec
11 Passive Arming - on/off
( II+III)
1/2 sec
12
Timer Start Mode - on/off
(II+ IV)
1/2 sec
13
Turbo Mode - on/off
(III+IV)
( I + III) -
14 2 sec Shock Sensor – on/off.
( II + III) -
2 sec
15 Mute mode (Vibration only) – on/off.
( I + II) - 2 sec
16 Programming Menu 1
( I + III) -
17 2 sec
Programming Menu 2
Note :
"( ) " means simultaneously pressing the buttons
"( ) - " means simultaneously pressing the buttons for 2 seconds.
Page 9
Function Factory
Setting
On
Off
Off
Off
Off
On
Off