Quickstart - Macherey-Nagel URYXXON Relax User Manual

1. Quickstart

Unpack the instrument and place it on an even, hard surface. Connect the pow-
er supply and turn the equipment on with the On/Off-switch (Pic. 4-
self test the start screen will appear on the display.
• Dip a test strip into the urine sample for approx. one second.
• Blot by touching the edge of the strip to a paper towel to remove excess urine.
• Place the strip on the strip holder
• Slide or push the strip to the end of the channel. Do not touch the reagent
pads on the test strip.
The instrument will automatically detect an applied strip. The measurement cy-
cle will be started. A progress bar on the display shows the remaining measure-
ment time.
Note: If "Autostart" (Chapter 9.5 "How to deactivate and activate the autostart")
is deactivated, the measurement must be started using the start control panel
.
Notice:
The strip will be drawn into the instrument after 30 sec.
MN Manual URYXXON
Manual URYXXON
URYXXON STICK 10 URYXXON STICK 10
Insert strip!
SN: 0001
ID: 1025358
(P)
Display 1: Start menu
Relax EN V 3.00 / 03.16
®
Relax
®
). After the

59