Manual URYXXON
be saved. Save by pressing
pressing
. A change of the parameter order for the strip parameter Micro-
albumin is not possible.
9.1.4. Test Strip LOT
The LOT-administration of URYXXON
ting. See Chapter 12.2 "How to control the LOT-control (LOT activate)".
9.2. How to protect settings from unauthorized access
Select "Password" in the settings menu if you want to protect the instrument
settings with a PIN. An option panel with the possibilities "ON" and "OFF" will be
displayed. Selecting "ON" will enable the PIN-protection.
After enabling the PIN-protection a numerical pad will appear. Enter a 4-digit
PIN and confirm by pressing
attempt to change the settings.
Attention:
A forgotten PIN can not be reconstructed. Only a complete reset of the instru-
ment will delete the PIN-protection. This will result in loss of all results and
settings!
9.3. How to turn the printer on and off
Selecting "Printer" in the settings menu will bring up an option panel. Choose
the desired option and confirm.
9.4. How to enable and disable acoustic signals
Select "Sound" in the settings menu to enter the settings for acoustic signals.
9.4.1. Acoustic confirmation of user inputs
In the preprogrammed settings all user inputs are confirmed with an acoustic
signal. Disable or enable these signals by choosing "ON" or "OFF" in the box
"Touch".
9.4.2. Acoustic warning on positive results
In the preprogrammed settings an acoustic signal will be given on positive find-
ings. Disable or enable this signal by choosing "ON" or "OFF" in the box "Posi-
tive".
9.5. How to deactivate and activate the autostart
Select "Autostart" in the settings menu. In basic mode URYXXON
82
Relax
®
or go back to the preprogrammed order by
®
Relax is deactivated in the default set-
. The PIN will be asked for upon the next
Manual URYXXON
®
Relax EN V 3.00 / 03.16
®
Relax auto-
MN