Part Numbers - Aquacal DIG-220 Owner's Manual

Using the Saturation Index (SI) Continued:
Examples:
pH = 7.4 ..................................................................................... :
Water Temperature = 84 F ....................................................... :
Calcium Hardness = 400 ppm ................................................. :
Total Alkalinity = 125 ppm......................................................... :
Salt Level = 3200 ppm ............................................................... :
pH = 7.8 ..................................................................................... :
Water Temperature = 84 F ....................................................... :
Calcium Hardness = 600 ppm ................................................. :
Total Alkalinity = 200 ppm......................................................... :
Salt Level = 3200 ppm ............................................................... :

Part Numbers:

MANIFOLD UNION w/Strainer
(#19065)
Union Nut
Union O-Ring (#19062)
S t r a i n e r
(#19064)
MANIFOLD ASSEMBLY (STK0035):
(Tri-sensor and Cell sold seperately)
26
REFERENCE SECTION
Water Test Results #1
pH = 7.4
TF = 0.7
CF = 2.2
AF = 2.1
SC = 12.4
Water Test Results #2
pH = 7.8
TF = 0.7
CF = 2.4
AF = 2.3
SC = 12.4
FIG-26
Nut only for 2" Slip
Union (#312-A) (51 mm)
FIG-25
7.4 + 0.7 + 2.2 + 2.1 – 12.4 = 0 (Water is perfectly
7.8 + 0.7 + 2.4 + 2.3 - 12.4 = 0.8 (Water is scale forming)
(#APA0003)
Tri-sensor with
integrated cord
(#19050)
FIG-29
Electrolytic Cell:
(Cell Unions and Cord ordered separately)
UNION COMPLETE (#19070)
Cell (#'s PPC1, PPC3, PPC4, PPC5)
Union O-Ring
(#19070-0)
2" Slip Union (#312-B)
(51 mm)
balanced)
(FIG-24)
12' (3.6 m) Cell Cord (# 952-ST/DIG)
Red Cap Plug for PPC1 and PPC3 cell cord
FIG-27
FIG-28