AGFA Drystar AXYS User Manual page 49

If, on the front panel display, the READY message is shown, the status indicator LED is
constantly green.
If, on the front panel display, the print queue screen is shown,
the status indicator LED is green and blinking.
Mod.name
3 Make sure that the printer is loaded with appropriate consumables.
2852 A EN 20070205
Note: It takes 9 minutes before the Drystar AXYS can start printing. After 4
minutes the READY message appears and from then on you can send print
jobs to the printer, but it will take another five minutes for the printer head
to heat up. When you send print jobs to the Drystar AXYS during this five
minutes, the printer will use that time to calculate the print job and the
display will inform you that the printer is warming up.
PR
1 2
Note: Refer to page for detailed information on loading films.
Note: If the job status displays a warning or error indication, refer to
"Troubleshooting checklist" on page 127.
D AXYS
RYSTAR
49