Dvd Troubleshooting - Toshiba 29PB201 Operating Instructions Manual

3. Press Down / Up / Left / Right or the numeric
button (s) to select the preferred title.
4. Press OK.
To confirm the selected items. The played item
may be a motion picture, a still picture or another
submenu depending on the disc.
For your reference:
If an action corresponding to a button is prohibited the "
" symbol appears.
Notes on Playback:
1.
No sound will be heard during Rapid advance
or Rapid reverse.
2. No sound will be heard during Slow motion play.
3. Reverse slow motion play may not be available
depending on the dvd content.
4. In some cases, the subtitle language is not
changed immediately to the selected one.
5. When the preferred language is not selected even
after pressing the button several times, it means
that the language is not available on the disc.
6. When the player is restarted or the disc is
changed, the subtitle selection is automatically
changed back to the initial settings.
7.
If a language is selected, not supported by the
disc, the subtitle language will automatically be
set to the disc's priority language.
8. Usually a circulation will happen while switching
to another language, that is you can cancel
the subtitle by pressing this button a number
of times until "Subtitles Off" appears on the
screen.
9.
When the power is turned on or the disc is
removed, the language heard is the one
selected at the initial settings. If this language
is not recorded on the disc, only the available
language on the disc will be heard.
10. Some DVDs may not contain root and/or title
menus.
11. Reverse stepping is not available.
12. For your convenience:
If you attempt to enter a number greater than
the total time of the current title, the time
search box disappears and "
message appears on up-left corner of screen.
13. Slide Show is disabled when the ZOOM mode
is on.

DVD Troubleshooting

Poor picture quality (DVD)
• Make sure the DVD disc surface is not damaged.
(Scratch, fingerprint etc.)
• Clean the DVD disc and try again.
See instructions described in "Notes on Discs" to clean
your disc properly.
• Ensure that the DVD disc is in the tray with the
label facing forward.
• A damp DVD disc or condensation may effect the
equipment. Wait for 1 to 2 hours in Stand-by to
dry the equipment.
Disc does not play
• No disc in the machine. Place a disc into the loader.
• Disc incorrectly loaded.
Ensure that the DVD disc is in the tray with the label
facing forward.
• Wrong type of disc. The machine cannot play
CD-ROMS etc. The region code of the DVD must
match the player.
Wrong OSD language
• Select the language in the set-up menu.
• The language for the sound or subtitles on a DVD
cannot be changed.
• Multilingual sound and/or subtitles not recorded
on the DVD.
• Try to change the sound or subtitles using DVD's
title menu. Some DVD's do not allow the user to
change these settings without using the disc's
menu
• These functions are not available on the DVD.
No picture
• Make sure you have pressed the correct buttons
on the remote control. Try once more.
No sound
• Check if volume is set to an audible level.
• Make sure the sound isn't turned off by mistake.
Distorted sound
• Check that the appropriate listening mode setting
Input Invalid"
is correct.
If nothing works
If you have tried the above solutions and none seem
to work, try switching your TV-DVD off and on again.
If this does not work, contact your supplier or TV-
DVD repair technician. Never attempt to repair a
defective TV-DVD yourself.
English - 25 -