Connections - Toshiba 29PB201 Operating Instructions Manual

Connections

Connector Type
Scart
Connection
(back)
VGA
Connection
(back)
(**)
SIDE AV
PC/YPbPr
Audio
Connection
(side)
(**)
SIDE AV
PC/YPbPr
Audio
Connection
(side)
HDMI
Connection
(back)
SPDIF
(**)
SPDIF
(Coaxial Out)
Connection
(back)
SPDIF
(**)
SPDIF
(Optical Out)
Connection
(back)
(**)
SIDE AV
Side AV
(Audio/Video)
Connection
(side)
(**)
SIDE AV
Side AV
(Audio/Video)
Connection
(side)
HEADPHONE
Headphone
Connection
(side)
PC to YPBPR
YPbPr Video
Connection
(back)
USB
Connection
(side)
CI
Connection
(side)
If you want to connect a device to the TV, make sure that both the TV and the device are turned off before making
any connection. After the connection is done, you can turn on the units and use them.
Cables
YPbPr/PC Audio Cable
Side Audio/Video YPbPr/PC Audio
Connection Cable Cable
AV Cable
Side Audio/Video Audio/Video
Connection Cable Cable
PC to YPbPr Connection Cable
English - 10 -
Device
NOTE: When connecting a device
via the YPbPr or the Side AV input, you
must use a connection adapter cable.
See the illustrations on the left
can use YPbPr to VGA cable to enable
YPbPr signal via VGA input. You cannot
use VGA and YPbPr at the same time.
To enable PC/YPbPr audio, you will need
to use the Side AV input with a YPbPr/
PC audio cable for audio connection,
using the Side AV connection cable's
RED and WHITE inputs (To enable
PC/YPbPr audio, you will need to use
the side audio inputs with a YPbPr/
PC audio cable for audio connection
[Depending on the model]). If an
external device is connected via the
SCART socket, the TV may automatically
switch to AV mode. When receiving
DTV channels (Mpeg4 H.264) or while
in Media Browser mode, output will not
be available via the scart socket. When
using the wall mounting kit (available
from third party in the market, if not
supplied), we recommend that you plug
all your cables into the back of the TV
before mounting on the wall. Insert or
remove the CI module only when the TV
is SWITCHED OFF. You should refer to
the module instruction manual for details
of the settings. The/Each USB input of
your TV supports devices up to 500mA.
Connecting devices that have current
value above 500mA may damage your
TV. By connecting an HDMI cable to your
TV, you have to use only a shielded HDMI
cable to guarantee a sufficient immunity
against parasitic frequency radiation.
(**) Depending on the model
side. You