Table of Contents
Advertisement
Antenna/Cable
TV and VCR Connections
- After antenna cable connections
are made, you are still required to connect the VCR using a video/audio
connecting
cables for (stereo)
playback of good quality from the VCR. See page 38.
A'ntenna
lead-in
ANT-1
OUT
ANT-2
VCR
Note: On many VCR's, playing tapes causes the VCR's TV/VCR switching
to disconnect
the antenna signals from the TV.
If you cannot select a certain channel, try pressing the TViVCR button on the Remote Control.
Antenna
or
Cable
lead-in
®
VCR
®
Notes:
• When conne_ng_cable
"IV converter/decoder
(_):
All channel_'ncluding
the unscrambled
channels will come through
the ANT-1 terminal
whenever
the antenna input
is set to the "ANT 1" mode.
All channels
including
the scrambled
channels from the decoder box will come through
the VCR and the ANT-2
terminal
whenever
the antenna input is set to the "ANT 2" mode. Select channel 3 or 4 on your TV and VCR to match
your converter's
output
channel. See page 16.
• The cable (_) connection
is necessary only when the cable TV converter/decoder
(_) is connect_.d.
6
Advertisement
Table of Contents
