Philips VARI-LITE VL6000 Beam Luminaire User Manual page 67

Step 2. Unzip firmware file you downloaded to a folder on your computer.
Step 3. Insert USB Upload Cable (sold separately) into a USB 2.0 compatible port on
your computer (do not use a USB hub).
Step 4. Double click on PEGASUS Software shortcut on your desktop.
Step 5. When application opens:
a. Select Vari-Lite for luminaire type (as shown in
b. As indicated in
Step 6. In browser window, navigate to folder where Vari-Lite firmware was extracted.
a. Click on any file in folder.
b. Click Open button on bottom of screen.
Step 7. Click on bin file for luminaire to be updated (for example, VL6000_101716.bin) as
highlighted in
NOTE: Select High Speed
option when uploading to
16 or less luminaires.
Step 8. As indicated in
a. During upload, PEGASUS and luminaire screens will display a progress bar showing
b. Once progress bar shows completed on computer screen, wait approximately one minute
02.97 08.000 2
Figure 3-8: PEGASUS Software Selection Screen
3-8, click on Select Folder button to open browser window.
Figure
Figure 3-9.
Figure 3-9: bin File Selection
Figure 3-9, click on Update Devices to start upload.
upload status.
before moving to next step. Note, The progress bar on luminaire LCD display may
continue for a short time after computer progress bar shows completed.
2 7 Ap ril 2 017
O : U
PERATION PDATING
Figure 3-8.).
A
3
S
OFTWARE
B
Progress Bar
49