Table of Contents
Advertisement
28. Do not stand on the machine. Serious injury
could occur if the machine tips over.
29. Never leave the machine running unattended.
Turn the power off and do not leave the
machine until it comes to a complete stop.
30. Remove loose items and unnecessary work
pieces from the area before starting the
machine.
31. Never hand hold the material. Always use the
vise and clamp it securely.
32. Be sure that blade is not in contact with
workpiece when motor is started. Allow motor to
come up to speed before bringing blade into
contact with workpiece.
33. Avoid contact with coolant, especially guarding
your eyes.
34. Never reach around or over saw blade during
operation. Keep hands and fingers away from
blade area.
Familiarize yourself with the following safety notices used in this manual:
This means that if precautions are not heeded, it may result in minor injury and/or possible
machine damage.
This means that if precautions are not heeded, it may result in serious, or possibly even fatal,
injury.
35. Do not remove jammed pieces until blade has
stopped.
36. Don't use in dangerous environment. Don't use
power tools in damp or wet location, or expose
them to rain. Keep work area well lighted.
37. Use proper extension cord. Make sure your
extension cord is in good condition. When using
an extension cord, be sure to use one heavy
enough to carry the current your product will
draw. An undersized cord will cause a drop in
line voltage resulting in loss of power and
overheating. Table 2 (sect. 6.3) shows correct
size to use depending on cord length and
nameplate ampere rating. If in doubt, use the
next heavier gage. The smaller the gage
number, the heavier the cord.
3
Advertisement
Table of Contents
