Sony BVM-1911 Operation And Maintenance Manual page 8

C
0
-~
ro
C.
0
Section 1 Operation
1 -4
11.
Operation
Combination of the optional boards
The BVM-1911/201 lP is equipped with the board compartments Bl
through BS behind the right-side panel, each of which can hold an
optional board selected from the·B boards listed above.
II
H~
I
'----.--------'
Board compartments
Right-side view
The BVM-1911 comes from the factory with the BT (NTSC comb
adaptor) and BC (NTSC adaptor) boards installed in compartments B4
and BS.
The BVM-201 lP comes from the factory with the BD (PAL adaptor)
boards installed in compartment BS.
Note that the combinations of boards are limited by the allowable
board assignments, as shown in the table on the next page.
Add the desired boards or replace the supplied BT, BC or BD board
with optional boards, referring to the table on the next page.
1@14-i
• The compartments other than B 1 through BS are reserved for the
supplied BA, BG, BH, BI and BJ boards. Be sure to use these
boards in the respective compartments having the same names.
• Do not leave compartment BS empty. Be sure to insert one of the
boards specified in the table on the next page.
If
no board is
inserted, the luminance/chrominance or luminance channel will not
be activated in composite signal mode.