Sony BVM-1911 Operation And Maintenance Manual page 30

=
=
=
C
.Q
§
Q)
C.
0
...:
Section 1 Operation
1-2611
Operation
4
Should the cursor on the initial menu not be located at INPUT
CONFIG, press the~ button until it returns to INPUT CONFIG,
and press the ENT button.
mm
If the message "PLEASE ENTER PASSWORD" is displayed, enter
the password.
See "1-4-5. Changing and Applying the Password."
The input configuration set in step 2 for the INPUT ,selector selected
in step 1 is now stored in memory.
The message "DAT A SAVED" is momentarily displayed and the
monitor returns to normal status.
Repeat this procedure for the other INPUT selectors as desired.
To cancel the operation
Press the ESC button before pressing the ENT button in step 4.