Maintenance - BEAUTY ANGEL C 3 PLUS Operating Instructions Manual

Cleaning and maintenance
Component
1 Adjustable air nozzles
2 Control panel
3 Acrylic glass panel
Handle
Protective goggles
MP3 cable
5 Body cooling air nozzles, foot end
6, 8, 11 Surfaces
9 Nozzles AQUA / AROMA SYSTEM
10 Body cooling air nozzles
4 Filter
7 Filter
32/62
Interval
X
X
X
X
X
X
X
X
X
X
X
X
NOTE:
Cleaning must be confirmed after each application by press-
ing the START/STOP button (when the warm-down time for
the main fan has finished).
5.5

Maintenance

Maintenance and care play a major role in deciding whether the device meets
the requirements placed on it in a satisfactory manner. Compliance with the
specified maintenance intervals and the careful conducting of the mainte-
nance and care work are therefore absolutely necessary.
The current operating hours of maintenance parts can be called up in service
mode (see 'Voreinstellungen/Presettings', order no. 1011777-..).
We point out that the device must be subjected to regular inspections by our
customer service or an approved specialized company every 12 months (from
commissioning) to maintain its proper condition!
Inspections and maintenance work that has been carried out must be entered
in the equipment, operating and maintenance booklet (order no. 1010363-..).
Activity
Cleaning and disinfection
Cleaning and disinfection
Cleaning and disinfection
Cleaning and disinfection
Cleaning and disinfection
Cleaning and disinfection
Clean
Clean
Clean
Clean
Remove and clean filter
Remove and clean filter
See page
30
30
30
30
30
30
30
30
30
30
46
47