Cleaning and maintenance
36/62
5.7.2
Remove the canopy panel
–
Loosen the screws. Remove the outside screws first and then remove the
screw in the middle.
–
Support the canopy panel with one hand so that it does not fall down.
–
Carefully lay the canopy panel aside.
The assembly is the same process in reverse order.
When assembling the device please note:
–
Support the canopy panel with one hand so that it does not fall down.
–
Refit and retighten the screws. Refit the middle screw first and then the
outer screws.
–
Remove fingerprints and other soiling carefully.