Table of Contents
Advertisement
1.
Power 750W
2.
Power 1250W
1&2. Power 2000W
3.
Thermostat
Note: When heaters are turned on for the first time or when they are turned on after
not being used for long period in time it is normal for that the heater may emit some
smell and fumes. This will disappear when the heater has been on for a short while,
if the smell or fumes do not disappear we advise to switch off the heater and contact
a specialist.
Following the above guidelines choose a suitable location for the heater.
•
Turn the thermostat dial fully in a clockwise direction to the maximum
setting.
•
Turn on the heater by the power switches on the side of the heater, once
on these will illuminate. For the maximum heat setting both switches
should be on.
•
To reach the desired room temperature turn the thermostat anti-clockwise
until the thermostat "clicks off" and the lights on the switches are seen to
go out. The heater will keep the air temperature in the room at the set
temperature by switching on & off automatically.
NOTE: The heater does remain hot / warm for some time after the unit has
been switch off, please handle with care.
2580
OPERATION
5
2
1
3
Ver. 2 - 04/14
Advertisement
Table of Contents
